What Is Included When You Order Replacement Hardware For Your Trailer Hitch?

Question

Question:

What comes in the Replacement Hardware Kit for the Hidden Hitch 78214 hitch? Thanks!

asked by: Kristy L

0

Expert Reply:

I tried looking for your Hidden Hitch model 78214, and I was not able to pull anything up.

However, whenever you use the Replacement Hardware Kit for Trailer Hitches # RHK you will receive all the original hardware that came with the hitch.

To order new set of hardware, you'll just need to enter your hitches part number in the "Hitch Item Number" box, and from the drop down, select the manufacturer of the hitch.

expert reply by: Bryce D

0

Answer 1

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch…

view full answer...

Answer 2

You will need to order the Replacement Hardware Kit #RHK. On the product page you will enter Curt Trailer Hitch Receiver #13147. This will then supply you with all the hardware to install the receiver on a 2009-2013 Subaru Forester. If you are also…

view full answer...

Answer 3

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

No, the Replacement Mounting Hardware #C75JR is not going to fit the Curt Class III Hitch #C13135. If you are in need of a hardware kit for the #C13135 hitch, we can provide that with Part #RHK. When you go to the page for #RHK you will see a box…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 for your 2023 Mazda CX-9 is no longer compatible with the J-Pin 63201. Draw-Tite stopped making their receivers compatible with this pin in 2021 and we have long sold through all those receivers.…

view full answer...

Answer 7

Yes, the Curt EXO Swing Away Enclosed Cargo Carrier part #Y62VR is perfectly compatible with the 2 inch Curt Hitch part #C13305 you have installed on your 2018 Volvo S90. The shank of this has enough rise built into it that you would not have any…

view full answer...

What Is Included When You Order Replacement Hardware For Your Trailer Hitch?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching