Which Roadmaster Reflex Mounting Bracket Kit Fits 2021 Fleetwood Bounder 35P

Question

Question:

I have a 2021 35p bounder and need the brackets for my RSSA

asked by: Dennis

0

Expert Reply:

The correct Roadmaster Reflex mounting brackets for a 2021 Fleetwood Bounder 35P would be the part # RM-RBK25.

expert reply by: Jameson C

0

Answer 1

I attached a picture that I took from the install instructions for the Roadmaster Reflex Steering Stabilizer part #RM-RBK25 that you referenced to thist page.

view full answer...

Answer 2

I attached a picture that shows the correct orientation for the Roadmaster Reflex Steering Stabilizer #RM-RBK22-RSSA and how it should install on your 2018 Ford F-53 motorhome chassis.

view full answer...

Answer 3

The correct steering stabilizer for your 2012 Coachmen Mirada, which was built on a Ford F-53 chassis, is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK22-RSSA. I confirmed this with the manufacturer…

view full answer...

Answer 4

The etrailer logo is a sticker placed on the Peterson Clearance lights #M146R for photo and video use. This line of lights including #M142R and #M421R does not come with the sticker. If you do by chance receive a product with this sticker it is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...