Weight Of The Roadmaster Rear Anti-Sway Bar # RM-1209-131

Question

Question:

The Winnebago view motorhome has small available weight allowance to fit into the 11030 Pound limitation. Any add ons to the unit will need to be subtracted from that limit. What is the total weight of these sway bar components after installation? Thank you

asked by: Paul W

0

Expert Reply:

The Roadmaster Rear Anti-Sway Bar # RM-1209-131 weighs approximately 70lbs.

expert reply by: Kevin C

0

Answer 1

It sounds like you are asking about how the two sway bars line up for installation on a 2017 Winnebago View 24V with a 2017 Mercedes-Benz Sprinter 3500 chassis. The important thing to consider is the vehicle style here. For a Class C motorhome style…

view full answer...

Answer 2

I spoke with Roadmaster to ensure the Roadmaster Rear Anti-Sway Bar Item #RM-1209-120 would be a confirmed fit with your 2018 Mercedes-Benz Sprinter 3500 dually and they have confirmed it will work.

view full answer...

Answer 3

Since you have the RetraxPRO XR #RTT-80222 on your 2019 Nissan Titan you could get the Yakima Overhaul #Y01151-5855 which will adjust to sit above the cab of your truck. The rod vault #TH87YV will wrap around the crossbars on the ladder rack.…

view full answer...

Answer 4

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 5

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 6

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 7

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 8

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 9

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 10

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...

Answer 11

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...

Answer 12

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...