Replacement Fan Motor For A MaxxFan Deluxe 7500K

Question

Question:

I need a replacement motor for my maxxfan deluxe 7500k, do you have what I need?

asked by: Steve C

0

Expert Reply:

Yes we do!

For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K, you'll want to use the:

-Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968.

This will replace the 12-volt DC variable-speed fan motor on your MaxxAir MaxxFan RV roof vent models: MA00-04000K, MA00A04301K, MA00A04401K, MA00-04500K, MA00-05100K, MA00-05301K, MA00-06200K, MA00-06401K, MA00-07000K, or MA00-07500K.

expert reply by: Bryce D

0

Answer 1

For your MaxxFan part #MA00-07500K that you referenced the correct replacement motor is the part #MA10-20968 that you referenced. The motor comes with connectors that will attach to the circuit board that controls the motor which is part…

view full answer...

Answer 2

Our part number for the 10C21275KE MaxxAir MaxxFan Circuit Board is part #MA39FR. This is for the exhaust only models like your 7501K and should get your fan back up and running. I don't know what type of troubleshooting you've done…

view full answer...

Answer 3

Based on the problem you are having with your MA00-05100K Maxxair fan what you would need to fix it would be a replacement circuit board which would be the part #MA10A21276K.

view full answer...

Answer 4

Your MaxxFan Plus Roof Vent #MA00-04500K uses the Remote #MA00A01150K. The Key Wall Control #MA00A03550K is not compatible with your fan.

view full answer...

Answer 5

What I think you are asking is if either the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent, #MA59FR or, the #MA00A03550K can be used with a MaxxFan - 00-04951KSX. The #MA59FR controls the 10-speed fan, electric lift lid,…

view full answer...

Answer 6

I'll start off by saying that typically the flashing green lights on your MaxxFan #MA00-04000K means that there is some sort of voltage issue and even though when you tested you're getting what seems to be proper voltage, I would guess there…

view full answer...

Answer 7

It is possible the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents #MA10-20968 will work as a replacement for the 10-20965 motor, but it actually depends on the model of MaxxAir fan you have. It is likely this will…

view full answer...

Answer 8

Based on the part number of your motor the correct circuit board would be the part #MA10A21275K.

view full answer...

Answer 9

To properly install The Replacement Key Wall Control For MaxxFan Plus and Deluxe - 4 Key #MA00A03550K you will need The Communication Cable #34279523. I attached a review video link below.

view full answer...

Answer 10

A 4-wire phone cable is not something that we are aware can be used instead of the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. This is what you would need as opposed to a phone cable for models 00-04500K,…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...