Thule Criterium Mount For Thule AeroBlade Bars

Question

Question:

Hello. I just bought second-hand Thule Creterium 598 bike racks that dont fit my Thule AeroBlade bars. Would the Xadapt2 or Xadapt8 be the solution?

asked by: Carlos

0

Expert Reply:

When it comes to attaching your Thule Creterium 598 bike rack to your Thule AeroBlade Crossbars The Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter for Criterium Bike Rack # Xadapt8 is the correct adapter you will need.

This adapter will allow you to attach the Thule Criterium bike carrier to the Rapid Aero, AeroBlade and Xsporter load bars.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

For your Thule WingBar Crossbars you'll want to use the Thule Eye Bolt Tie-Down Anchors #TH37QC which will fit the Thule WingBar, SlideBar, and ProBar Evo.

view full answer...

Answer 2

The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part #Y03539. This will fit the original bolt and allow you to attach to your roof rack.

view full answer...

Answer 3

If you do not want to use the Yakima Universal Mighty Mount kit #Y03590 on your Thule AeroBlade cross bars the Mighty Mount 39H #Y03539 accessory adapter will do the trick. These fit the same dimensions as the Thule aero-style crossbars and sit at a…

view full answer...

Answer 4

There are ladder racks which fit your 2014 Toyota Tacoma with the Deck Rail System, though the MaxxTow Truck Bed Ladder Rack MT70423 is not one of them. Instead, I recommend checking out the Rola Haul-Your-Might T3 Truck Bed Ladder Rack #59799 which…

view full answer...

Answer 5

First, we need to determine which Thule aero bars you have. The older bars were called Rapid Aero bars and were more symmetrical. The new bars are called AeroBlade bars and look more like a wing. I have included a 3/4 profile picture of the AeroBlade…

view full answer...

Answer 6

For the Thule Big Mouth bike rack the correct adapter is the Thule #XADAPT2. This will allow your bike rack to install on the crossbars of your rack and work well.

view full answer...

Answer 7

We can get what you need depending on exactly what you're doing the Thule Xadapt12 part #THXADAPT12 could work. It uses barrel nuts that thread down on the bolts for security. You can use the Replacement M8 T-Bolt part #853-0782 this will allow…

view full answer...

Answer 8

Older kayak carriers can be mounted to newer aero bars, but it also depends on what type of kayak carrier you have and what kind of clamp it uses. The t-track are a fairly modern feature in crossbars so most of the older accessories only mount with…

view full answer...

Answer 9

The bolts of the #Xadapt2 that you mentioned are M6. For a low profile Thule M6 knob we have the part #753-0783.

view full answer...

Answer 10

I went out to the warehouse and pulled an Thule #XADAPT8 kit, an M6 barrel nut, and a regular M6 nut. I tested all the parts together and found what I think is the problem you are having. The bolts are M6 bolts but they are fine threaded. You are…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Thule Criterium Mount For Thule AeroBlade Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching