Thule Roof Rack Adapter fro AeroBlade Crossbars

Question

Question:

Which mighty mount will work on a thule aero crossbar that is 3 1/8 inch wide , 32h, 34h, or 39h ? I don’t like the universal mounts they make , they seem unstable and make my bike trays sit up too high on the roof rack .

asked by: Clint

0

Expert Reply:

If you do not want to use the Yakima Universal Mighty Mount kit # Y03590 on your Thule AeroBlade cross bars the Mighty Mount 39H # Y03539 accessory adapter will do the trick. These fit the same dimensions as the Thule aero-style crossbars and sit at a lower profile so your carrier(s) won't be too tall for your roof rack application.

expert reply by: Adam R

0

Answer 1

The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part #Y03539. This will fit the original bolt and allow you to attach to your roof rack.

view full answer...

Answer 2

When it comes to attaching your Thule Creterium 598 bike rack to your Thule AeroBlade Crossbars The Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter for Criterium Bike Rack #Xadapt8 is the correct adapter you will need. This adapter will allow…

view full answer...

Answer 3

The #Y03539 MightyMount 39H fits crossbars up to 3-1/8 inch wide by 1 inch tall, so they'll just fit your 3-1/8 inch wide by 1 inch tall WingBar Evo crossbars. Per Yakima, the #Y03539 Mighty Mount is compatible with the Y07012 BasketCase…

view full answer...

Answer 4

The dimensions of the Wingbar Thule crossbars like part #TH711420 are 3-1/8" wide x 1" tall.

view full answer...

Answer 5

The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less…

view full answer...

Answer 6

If you are referring to an anti-rattle device that actually tightens down over the accessory shank like the Roadmaster Quiet Hitch #RM-061, it's not going to be compatible with the etrailer Hitch Pin Alignment Collar #e98942. The collar will…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the…

view full answer...

Answer 8

The Yakima JetStream roof rack part numbers #Y00425, #Y53TR, and #Y46VR is an extremely nice roof rack for your 2021 Subaru Outback Wagon. This is what I would go with because in terms of quality, ease of use/install, quietness, and durability it…

view full answer...

Answer 9

All of the hitch options for your 2022 Volkswagen ID 4 have the same max tongue weight rating of 300 lbs. The tongue weight rating is the one that is of concern when using a bike rack. I recommend you use the Curt Trailer Hitch Receiver #C57JR…

view full answer...

Answer 10

The Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part #Y02443, will work with the trailer hitch on your 2021 Volkswagen ID 4. Provided your trailer hitch is a Class III trailer hitch. If you do not have a trailer hitch, we…

view full answer...

Answer 11

We actually have exactly what you are looking for; a 2 inch trailer hitch receiver to replace the 1-1/4 inch factory receiver on your 2021 Volkswagen ID.4: - Curt Trailer Hitch Receiver #C57JR I have added a cut out of the installation instructions…

view full answer...

Answer 12

Yakima Mighty Mount 39H #Y03539 are designed specifically for Yakima Core and JetStream crossbars. For the Thule AeroBlade crossbars the best option is the universal MightyMounts #Y03590.

view full answer...

Thule Roof Rack Adapter fro AeroBlade Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching