What SeaLand Technologies RV Toilets Does Replacement Flush Ball Assembly Fit

Question

Question:

You all do great work at eTrailer. Thank you. Is this the correct part for my circa 1991 Traveler toilet? Mine is white and has printed on it “Do Not Remove”. I wish I would have seen that prior to removing it.

asked by: Les

1

Helpful Expert Reply:

As long as your Sealand RV toilet has a plastic or metal pedal on it the replacement flush ball assembly part # DOM65FR would be the correct replacement for it.

expert reply by: Jameson C

1

Answer 1

Yes, the Replacement Toilet Bowl Seal Kit for Dometic Sealand and VacuFlush RV Toilets #DOM35FR is the correct seal for your Dometic Sealand 210 Traveler Lite RV Toilet.

view full answer...

Answer 2

Since the Dometic 110 is a Sealand the flush bar you'd need is the #DOM65FR.

view full answer...

Answer 3

The correct Sealand replacements parts are going to be the Replacement Toilet Bowl Seal Kit for Dometic Sealand #DOM35FR if you have the overflow hole in the toilet bowl or the Replacement Toilet Bowl Seal Kit #DOM53FR if you do not have the overflow…

view full answer...

Answer 4

There are going to be two options for best caulk or sealant for your RV and it is going to depend on where your are using it. If you are on your roof you will want a self leveling sealant like the Alpha Systems 1021 Self-Leveling Sealant for RVs -…

view full answer...

Answer 5

To properly identify the replacement seal for your Traveler toilet you will need to find the information sticker on the back of the toilet. These are generally never easy to find especially with the toilet installed so I have included some images to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For your SeaLand Model 210, I recommend the Dometic 310 Part-Timer RV Toilet #DOM57FR as a replacement over the Dometic 320 Full-Timer RV Toilet #DOM87FR that you mention. The Dometic 310 Part-Timer RV Toilet #DOM57FR features a slow-close lid, a…

view full answer...

Answer 8

For a toilet that won't hold water you definitely want a new one, as there aren't repair parts for it, and that includes the foot pedal. But since you have a four-bolt mount, you can easily replace it, you just need to measure for the fit.…

view full answer...

Answer 9

The Dometic 320 Full-Timer RV Toilet, #DOM87FR is a 2-bolt installation that fits most existing floor flanges same as the Sealand model 210.

view full answer...

Answer 10

Yes, the Dometic 510 Full-Timer RV Toilet #DOM29FR is a direct replacement for your SeaLand Model 210 toilet per Dometic. The toilet has a 2-bolt installation and the seal and hardware are included. If you have any further questions please feel free…

view full answer...

Answer 11

On the back side of the Dometic toilet there will be a label with part numbers and model info listed that you can check out to determine what model you have. The Dometic seal part #DOM63FR that you referenced fits 301,300,321,320,311, and 310 series…

view full answer...

Answer 12

Depending on what kind of toilet you have the model number may be printed on a sticker that will be on the right side of the base of the toilet. You can use a mirror or your cellphone to view the sticker if it is hard to get to.

view full answer...

What SeaLand Technologies RV Toilets Does Replacement Flush Ball Assembly Fit

Product Page this Question was Asked From

Continue Researching