Replacement Thule Spare Me Mounting Plate

Question

Question:

Wanting to use this on my 2001 Honda CRV with a Thule Spare Me bike rack

asked by: George A

0

Expert Reply:

Thule has a replacement mounting plate for their Spare Me with the part # 753-3532 but the Hollywood Racks plate you mentioned does not fit it.

expert reply by: Jameson C

0

Answer 1

The Yakima Replacement Back Plate for SpareTime Bike Carrier, part #8880578, will fit a 6-on-5/12-inch wheel bolt pattern, according to my Yakima contact.

view full answer...

Answer 2

We have a special backing plate for the older Swagman spare bike rack S64920 that allows the rack to fit 2006-2011 Toyota Rav 4s. For that you would want the part #P960.

view full answer...

Answer 3

The square shank on the Replacement Backing Plate for Surco Spare Tire Bike Rack #SPN-115 is 1-1/4" x 1-1/4" and measures 3-3/4" long while the holes for the bolts have a 3/4" diameter and are spaced 2-3/4" apart evenly. The…

view full answer...

Answer 4

The Replacement Mounting Plate, #753-3532, will allow you to use the original 963 Spare Me Bike Rack with your 2011 Toyota RAV4. There were mounting limitations with the original Spare Me bike rack that did not make it compatible with the 2007 to…

view full answer...

Answer 5

The overall diameter of the Replacement Mounting Plate for Thule Spare Me - Spare Tire Mounted Bike Carrier #753-3532 is 7-1/16", as you can see by the attached diagram. This mounting plate is a direct replacement for the Thule Spare Me bike…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Thule Spare Me Mounting Plate

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching