Replacement Keys For Bulldog Coupler Lock # BD580404

Question

Question:

Need spare keys for Bulldog item #580404?

asked by: Chris C

0

Expert Reply:

Though we do not sell the replacement keys individually the only way we can help you is if you purchase The whole Bulldog Lifelong Trigger-Style Coupler Lock and 2 inch Trailer Hitch Receiver Lock - Chrome # BD580404 again

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

I have a solution for you, but we do not carry replacement keys for the Bulldog Trigger Style Coupler Lock #BD580404 . The way you would determine the correct replacement key would be with what is usually a 3 digit number engraved or marked on the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 4

The distance between the lock pin and housing on the Bulldog Lifelong Trailer Coupler Lock #BD580403 is 1-5/8".

view full answer...

Answer 5

The Galeo Pro GPS Tracking Device #GA94FR has a motion sensor built in so it will "ping" the location whenever it moves or senses vibration. You can also press the "Locate" button within the app to get a ping on the tracker at any…

view full answer...

Answer 6

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…

view full answer...

Answer 7

I can definitely help come up with a way to make the Yakima EasyRider Double Decker Trailer #Y08129 as theft resistant as possible but I can't safely recommend you replace the hardware that secures the coupler or hinge to the trailer tongue with…

view full answer...

Answer 8

The LED Trailer Mini Clearance and Side Marker Light with Grommet #MCL10AKB will fit best with a wall (or bracket) thickness that is just under 5/16".

view full answer...

Answer 9

Thank you for your purchase of the Demco Channel Tongue Trailer Coupler - eZ-Latch. The diameter is 5/16" and the lock that is designed specifically for Demco couplers with the eZ-Latch is the following: - InfiniteRule Lock for Demco eZ-Latch…

view full answer...