Distance Between Lock Pin and Housing on Bulldog Lifelong Trailer Coupler Lock

Question

Question:

On the Bulldog BD580403, what is the distance between the 1/4 pin lock and the lock housing. I am looking for the inside dimension of this lock. It would be nice if it had the dimensions like the Master Lock 605DAT.

asked by: Kendall

0

Expert Reply:

The distance between the lock pin and housing on the Bulldog Lifelong Trailer Coupler Lock # BD580403 is 1-5/8".

expert reply by: Robin H

0

Answer 1

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 2

Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch diameter setups like you have.

view full answer...

Answer 3

I can definitely help come up with a way to make the Yakima EasyRider Double Decker Trailer #Y08129 as theft resistant as possible but I can't safely recommend you replace the hardware that secures the coupler or hinge to the trailer tongue with…

view full answer...

Answer 4

The LED Trailer Mini Clearance and Side Marker Light with Grommet #MCL10AKB will fit best with a wall (or bracket) thickness that is just under 5/16".

view full answer...

Answer 5

Thank you for your purchase of the Demco Channel Tongue Trailer Coupler - eZ-Latch. The diameter is 5/16" and the lock that is designed specifically for Demco couplers with the eZ-Latch is the following: - InfiniteRule Lock for Demco eZ-Latch…

view full answer...

Answer 6

There sure is! The correct locking pins for the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4" Drop - 6,000 lbs #C45901 is the Curt Lock Set #C23556. This set includes one lock to lock the ball mount section to the channel,…

view full answer...

Answer 7

Yes, you would need load resistors so that your LED 3rd brake light works correctly on your 1995 Chevy C/K 1500. LED Light Bulb Load-Resistors #DI34ZR are the best option for your application. I tried calling to get some technical info on the wiring…

view full answer...

Answer 8

The distance between the 1/4" pin and the main lock body on the #IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.

view full answer...

Distance Between Lock Pin and Housing on Bulldog Lifelong Trailer Coupler Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching