Can a 2022 Hyundai Santa Cruz Be Towed On a Demco Kar Kaddy X Tow Dolly?

Question

Question:

Can I put a Santa Cruz by Hyundai on A Demko car dolly?

asked by: Nancy A

0

Expert Reply:

According to the owners manual only the front wheel drive versions of your 2022 Hyundai Santa Cruz can be towed with a tow dolly. The Demco Kar Kaddy X Tow Dolly # DM9713093 is a great dolly for this vehicle as it does weigh under the 4,800lbs and the tread width is under 78" wide.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt #CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt #C68JR. Both of these plug into the tow package you referenced…

view full answer...

Answer 8

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 9

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 10

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 11

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...