Recommended Trailer Hitch For A 2016 Honda Odyssey

Question

Question:

re: Item # 76170, Not confirmed to fit 2016 Honda Odyssey. Will you try to fit it to a 2016 Odyssey in the near future?

asked by: Dwight Y

0

Expert Reply:

When installing a trailer hitch on your 2016 Honda Odyssey Though The Draw Tite Hitch # 76170 will not fit your vehicle The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75270 is confirmed to fit your 2016 Honda Odyssey.

The hitch # 75270 has an easy, bolt-on installation with no welding required. The hitch has a black powder coat finish that covers an e-coat base for superior rust protection.

The trailer hitch has a maximum gross trailer weight up to 4,500 pounds and has a maxim tongue weight up to 675 pounds. I would recommend checking the vehicle's manual to find the proper towing capacity of your 2016 Honda Odyssey.

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118521 is a plug and play harness that comes out as a 4 way flat connector. The harness plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Using this trailer harness with make your trailer's brake, stop, and turn lights mirror your vehicle's brake, stop, and turn lights.

To finish up your towing experience The Curt Towing Starter Kit # C45534 includes the ball mount, the 2 inch hitch ball, and other starter towing accessories that you will need.

I attached an installation video link below.

expert reply by: Noah E

0

Answer 1

As always, you will want to make sure that you start off by checking your owner's manual to see if there are any specifications when you are towing with your 2016 Honda Odyssey. I looked at your owner's manual and it looked like Honda…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

A transmission cooler isn't a vehicle specific item and the 2013 and 2014 Odyssey are of the same generation, so the coolers shown to fit the 2013 Odyssey would work just fine with the 2014 model. The #D13502 would be an excellent choice for your…

view full answer...

Answer 4

A transmission cooler isn't a vehicle specific item and the 2013 and 2015 Odyssey are of the same generation, so the coolers shown to fit the 2013 Odyssey would work just fine with the 2015 model. The #D13503 would be an excellent choice for your…

view full answer...

Answer 5

So the most important thing to know about a transmission cooler is that the larger the cooler, the more effective it will be. The reason for that is you cannot overcool fluids so the more surface area the fluid can go through to get cool, the better.…

view full answer...

Answer 6

I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you can…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Trailer Hitch For A 2016 Honda Odyssey

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching