Grille Guard Options for 2022 Chevrolet 2500HD

Question

Question:

Looking at the Weston Grille guards. In the provided photo it appears that the uprights are blocking the fog lamps located just outside of the tow hooks in the front bumper? Can you please verify?

asked by: William S

0

Expert Reply:

There may be a level of obstruction when installing the Westin HDX Grille Guard with Punch Plate, # W98RV for any lower level lights in the bumper. That is the nature of the design for needed mounting location and dependent on which bumper option your vehicle is equipped with. There is also the option of the Westin HDX Modular Grille Guard with Punch Plate, # W44NF.

expert reply by: Michael R

0

Answer 1

EZ Connector Trailer Connector Adapter #319-R7-51 is a 7-pin adapter which has a ground pin plus 6 other contacts to carry the various light, power and brake signals from the 7-way RV blade connector. Their similar Magnetic 14-Pin Trailer Connector…

view full answer...

Answer 2

For an EZ connector style of 7-way that is confirmed as a fit for your 2022 Chevy Silverado 2500 you'd want the part #319-S7-06. This would be exactly what you are looking for.

view full answer...

Answer 3

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Grille Guard Options for 2022 Chevrolet 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching