Dimensions of the WeatherTech Universal Cargo Mat # WT11AVMCB

Question

Question:

Hi ... could you send me the dimensions for the above mat thanks...

asked by: Jim

0

Expert Reply:

I spoke to my contact at Weathertech and he informed me that the WeatherTech Universal Cargo Mat # WT11AVMCB that you referenced can be trimmed front to back from 36 inches down to 27-1/2 inches. And then from side to side from 53 to 41 inches.

expert reply by: Jameson C

0

Answer 1

The third row of seats on a 2015 Toyota 4Runner (if equipped), is so close to the rear door of the vehicle when it is up that you would have to either roll the mat up so that it could fit behind the rear seats and not obstruct the rear window or…

view full answer...

Answer 2

I can help you find the right black cargo mat for your 4Runner. The WeatherTech black cargo mat for the 2013 4Runner is #WT40486. In the 2013 Toyota 4Runner the third row seats are so close to the rear hatch of the 4Runner that when folded down…

view full answer...

Answer 3

I checked with my contact at Thule and verified that the Thule replacement hitch bolt you are looking for is part #908-1240-54. It is a 12 x 40mm hex bolt with a property class of 8.8. It should be installed with M12 washer, #951-1224-54, and M12…

view full answer...

Answer 4

The engine itself doesn't quite make the difference, but the model does. If you have the SX model of the 2019 Kia Sorento I recommend the Class III etrailer.com Trailer Hitch #e98843 because it has a matte black finish that does a great job…

view full answer...

Answer 5

Short answer is we know the part #C56256 is a fit for your 2017 Kia Sorento as this harness plugs into the taillight connectors and provides the trailer wiring. Since it installs like this no tow package would be needed as all versions of the vehicle…

view full answer...

Answer 6

I checked the reviews and our installers tech tips and we have had no complaints or warnings about the Draw-Tite Trailer Hitch item #76226 affecting the lift gate functions. This hitch is designed to fit the 2023 BMW X3 M40i, xDrive30i, and sDrive30i…

view full answer...

Answer 7

The Draw-Tite Class I Trailer Hitch, #DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball,…

view full answer...

Answer 8

The Thule Hullavator Pro - Lift Assist Kayak Carrier #TH898 requires a minimum of 4" overhang on both sides, no matter which crossbar setup you go with. For your 2019 Subaru Forester I recommend going with the Malone Airflow2 aero crossbars. Not…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...