Replacement Axle for 1989 Prowler Lynx 22H
Question:
I have a tandem axle 1989 Prowler Lynx 22H trailer that I need to find a replacement axle for. The spring center measurement is about 65-3/8, it looks like it has a 3 inch . The GVWR is 3500#. I believe it is a Hayes axle and it has 10 inch hub/drums. The axle looks like it is about 2-3/8inch diameter.
asked by: John B
Expert Reply:
Based on the diameter of your axle and the other information you have given me it sounds like you need a 3,500 lb replacement axle. In order to choose the correct replacement you will need the hub face to hub face measurement. We have 89" and 95" replacement axles. As long as the hub face measurement matches up you can adjust the spring center by cutting off the existing spring seats and welding on # TRSS238.
If you are unable to find a replacement axle that matches you can use the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs # TASR35HDS04. This system will replace your current axle and suspension system and is a good alternative when the right axle length isn't available. The Timbren system fits any frame width and can bolt or weld on for installation.
I have attached a link to all of our 3,500 lb axles for your reference.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 5 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Roadmaster Comfort Ride Fit 2018 Primetime Lacrosse 3360
- Article: Trailer Tire Sizing
- Q&A: Brake and Hub Parts Needed for 4 Lift Timbren Heavy-Duty Axle-Less Trailer Suspension
- Q&A: Timbren Axle Less kit for 4,000 lb Trailer that has 4 inch Lift
- Q&A: Why isn't Axle Spacing of Roadmaster Comfort Ride Listed
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Highest Capacity Timbren Axle Less Tandem Axle Setup Recommendation, Hubs, Actuator Brake Line
- Q&A: Can 235/75-15 Trailer Tires Be Replaced With 235/85R16 Tires For Higher Load Capacity
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Accurately Measure Trailer Leaf Springs