Tire Grip Vehicle Traction Recovery Tracks for Boat Ramp Use

Question

Question:

Good morning, I am looking at your traction mats to help get my Acadia up a slippery boat ramp. Do you have suggestions?

asked by: Ashley M

0

Expert Reply:

Of the traction mats we offer, I prefer the Tire Grip Vehicle Traction Recovery Tracks, # 288-07411-2. While these are not designed for use on a boat ramp, we have received feedback from customers that have had success using them in this manner.

expert reply by: Michael R

0

Answer 1

The Tire Grip Vehicle Traction Recovery Tracks part #288-07411-2 can be used on pretty much any surface to help improve traction so I see no reason as to why you cannot use them on a cement boat ramp with slippery algae.

view full answer...

Answer 2

Yes. The Tire Grip Vehicle Traction Recovery Track for Snow, Mud, and Sand #288-07411 aren't necessarily intended to be used in this manner, but we have had a customer report back that they've used them for this application…

view full answer...

Answer 3

The Tire Grip Vehicle Traction Recovery Tracks #288-07411-2 you referenced come with a 1-year limited warranty. I have attached a review video for you to check out.

view full answer...

Answer 4

Absolutely the Tire Grip Vehicle Traction Recovery Track #288-07411 can be used for extra traction on a boat ramp. They can be used virtually on any surface to help improve traction. We even had a customer write a review saying that's what…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 10

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…

view full answer...

Answer 11

We do have some options for replacing the Knott calipers and rotors on your Coyote Boat Trailer. We really do not have any info or specs on the Knott brand brakes, but since it is all for a 3,500 lb axle the sizing should be standard. Standard…

view full answer...

Tire Grip Vehicle Traction Recovery Tracks for Boat Ramp Use

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching