Will The Curt Hitch # C13206 on My 2019 Subaru Outback Wagon Fit On My 2022 Subaru Outback Wagon

Question

Question:

Hello i have a 2019 subaru outback with the curt class 3 that is attached with the crash bar. Will i be able to use it on my 2022 outback i have coming in soon

asked by: Alex T

0

Expert Reply:

When it comes to switching your Curt Trailer Hitch # C13206 and # C13410 on your 2019 Subaru Outback Wagon to a 2022 Subaru Outback Wagon neither hitch will work.

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C67JR is confirmed to fit the 2022 Subaru Outback Wagon. It has a different mounting style then the Curt hitches for the 2019 Subaru Outback Wagons. The hitch has a concealed cross tube, has a bolt-on installation with no welding required and has a gloss black powder coat finish over a protective base coat which offers a superior rust resistance.

I attached an installation video link below.

expert reply by: Noah E

0

Answer 1

The best trailer hitch we have available for your 2019 Subaru Outback Wagon is the Curt Class III #C13410 because of its hidden crosstube design and superior black powder coat finish. The hidden design means only the 2" receiver is visible from…

view full answer...

Answer 2

Yes, the Timbren Suspension Enhancement System - Severe Service #TGMRTT35D will fit your 2022 GMC Sierra 3500. This system has an 8,000-lbs capacity that will increase stability, reduce rear sag, and will extend the life of your suspension. Attached…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement system that you referenced #TGMRCK25D, is intended to replace the factory installed bump stops on your truck. These Timbrens are confirmed as a fit for a 2012 Chevy Silverado Pickup 2500 or 3500 and fit both…

view full answer...

Answer 5

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500 whether…

view full answer...

Answer 6

Timbren helper springs #TGMRCK25D and #TGMRTT35D have different designs. The springs for kit #TGMRCK25D are double-convoluted. For optimal balance between softness and toughness, fabricators choose the double-convoluted rubber spring. Taller than the…

view full answer...

Answer 7

The single convoluted springs from the Timbren SES Kit #TGMRTT35D are only 3-9/16 inches tall, but this kit also includes a 1 inch spacer, so it will sit 4-9/16 inches below the jounce bumper holder on the frame. Timbren recommends a distance of 1…

view full answer...

Answer 8

The Timbren Suspension Enhancement #TGMRTT35D or #TGMRCK25D for your 2023 GMC Sierra 2500 can be used for either towing loads or bed loads. These are some of the more heavy duty suspension options we offer and will work best when you are carrying at…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Will The Curt Hitch # C13206 on My 2019 Subaru Outback Wagon Fit On My 2022 Subaru Outback Wagon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching