Trailer Tire and Wheel for Tire Size 20.5 x 8.0 -10 For Use as Spare on Boat Trailer

Question

Question:

Is this avialble in paint painted finish?

asked by: John H

0

Expert Reply:

For your tire size of 20.5 x 8.0 -10 we have the part # AM3H400 which is mounted on a 5 lug wheel and is galvanized. This would work great on your boat trailer as a spare setup.

expert reply by: Jameson C

0

John H.

5/4/2022

Is this avialble in paint painted finish?

Reply

Jameson C.

5/4/2022

Yes we do with the part # AM3H480 which is a painted white wheel.

Reply

Answer 1

The Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel #AM3H454 is the updated metric sizing of the 20.5x8.0-10 tire that you currently have. The steel wheel uses the 5 on 5-1/2" bolt pattern that you currently have. So…

view full answer...

Answer 2

In the 10 inch wheel size the 20.5x8.0-10 that you have is the tallest size overall at 20.5 inch. If you wanted to bump up to a 21.9 inch overall diameter tire you could go to a 5.30-12 tire with something like the #AM30790 if you have a 4 bolt…

view full answer...

Answer 3

For a galvanized steel wheel that will fit 20.5x8.0-10 tires and has a bolt pattern of 5 on 4-1/2 inches you would want the Americana Steel Trailer Wheel #AM20048. The pilot diameter of this rim is 2.8 inches, I also attached a review video for this…

view full answer...

Answer 4

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 5

We have one trailer wheel that matches what you need with the part #AM20046 which is a 10 inch diameter trailer wheel that has a 5 on 4-1/2 inch bolt pattern and is otherwise correct for a tire size of 20.5x8.0-10.

view full answer...

Answer 6

The 205/65-10 size tire of part #AM3H454 is the metric sizing for a 20.5x8.0-10 size tire. Since you have a 5 on 5-1/2 bolt pattern this tire and wheel combo is exactly what you need. The alternative is to replace your hubs with a more common bolt…

view full answer...

Answer 7

Overpacking the trailer hub with grease is the number one reason for grease seal failure. For a boat trailer I would recommend re-packing the hubs by hand with grease once per season and you'd be fine. I don't like recommending people use…

view full answer...

Answer 8

Based on the pictures you attached and the outer bearing measurement you provided, it appears that you have 1-1/16 inch spindle like the BTR EZ Lube Spindle #TRU44FR. This particular spindle is designed for 2,000 pound axles and will use the same…

view full answer...

Answer 9

Your brake lights and turn signals for each side are on one circuit. The left side turn signal and brake light is generally the yellow wire going into your trailer connector. The first thing to do is check the fuses on your tow vehicle. Next, inspect…

view full answer...

Answer 10

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 11

Most trailer wiring problems are the result of a bad ground. What I would do is start with the connectors. Maker sure the connectors on both the trailer side and vehicle side are free of dirt and corrosion and that they are properly grounded. Next, I…

view full answer...

Answer 12

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Trailer Tire and Wheel for Tire Size 20.5 x 8.0 -10 For Use as Spare on Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching