Roadmaster Smart Diodes For Variable Voltage LED Tail Lights For A 2022 Jeep Wrangler Unlimited

Question

Question:

looking for just the diodes 2 for the Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights Item # RM47ZR. Are they sold separately?

asked by: Dave E

0

Expert Reply:

Yes, they are!

The diodes apart of the Roadmaster Wiring Kit # RM47ZR are available at # RO54FR.

expert reply by: Bryce D

0

Answer 1

According to Roadmaster, the 1.8V reading is in the acceptable range on your #RO54FR. The smart diode has built in resistors which take the voltage down low like that. It gets especially low for the LED version since it takes very little to power…

view full answer...

Answer 2

The wiring kit to flat tow your 2022 Jeep Cherokee Trailhawk does not include a charge line to the battery, so you would need to get one separately and install that so the battery does not die. If your motorhome does not have a charge line you would…

view full answer...

Answer 3

Yes, the two Roadmaster base plate kits part #RM-521451-5 and #RM-521451-4 are a fit for the 2022 Jeep Cherokee Trailhawk. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to…

view full answer...

Answer 4

No, when you are flat towing a newer vehicle, like a 2022 Jeep Cherokee Trailhawk, the odometer will not count the miles. I would be happy to recommend a flat towing set up for your Trailhawk along with the Tow Bar and Braking System you have…

view full answer...

Answer 5

Yes, The Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 will work with your wiring system to ensure that your towed vehicle's turn signal lights flash in tandem with your RV's lights. Using this relay will not interfere with…

view full answer...

Answer 6

Good question, and I checked with Roadmaster for you, and correct tow bar wiring diode kit will depend on if your 2021 Jeep Wrangler has the ParkSense proximity sensors or not. If it does have the ParkSense you will need the kit with smart diodes…

view full answer...

Answer 7

The part you are referring to (Mopar's 68321424AB) was indeed a fix for certain models and years of Jeep Cherokee that were experiencing the dreaded "death wobble", but your 2021 Jeep Cherokee Trailhawk does not fall under these years.…

view full answer...

Answer 8

You will need at least 5 main parts to flat tow your 2022 Jeep Cherokee Trailhawk. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have listed these out below. Base Plate Kit: - Roadmaster…

view full answer...

Answer 9

Yes, the Blue Ox Base Plate Kit #BX1143 for your 2022 Jeep Cherokee Trailhawk, will work great with the Roadmaster Falcon 2 Tow Bar #RM-520, with use of the adapter #RM-031. If you're interested in a complete flat towing setup for your Jeep…

view full answer...

Answer 10

I looked though the online version of the owner's manual for your 2018 Jeep JK Wrangler and there isn't a clear indication as to whether or not the key should be left in the ignition while it's being flat towed. There is a detailed…

view full answer...

Answer 11

There are 2 possible reasons why your install of the Flexo-Coil Wiring Kit #RM-15267 is causing an error to pop up on your 2021 Jeep Gladiator; the first is that something was installed incorrectly, and the second is that you have the ParkSense on…

view full answer...

Answer 12

The correct tow bar wiring diode kit will depend on if your 2023 Jeep Wrangler has the ParkSense proximity sensors or not. If your vehicle does have the ParkSense you will need the kit that has smart diodes so it will ensure that your tail lights get…

view full answer...

Roadmaster Smart Diodes For Variable Voltage LED Tail Lights For A 2022 Jeep Wrangler Unlimited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching