How To Support Slide-Out On 1998 Monaco Diplomat

Question

Question:

I was hoping that these would work for a 1998 Monaco Diplomat 38 ft single slide... we have had some roller issues and would like some additional support. Please do advise. Thank you so much.

asked by: Nicole B

0

Expert Reply:

The Ultra-Fab Slide-Out Supports for Motor Homes, # UF19-960003 that you linked to are adjustable supports that mount between the ground and the frame of slide out to reduce slide-out sag. This adjustment ranges in height from 26" to 47". This has a 4-3/4" inside measurement U-channel bracket that the RV's extension tubes rest against. This bracket straddles the frame member and tightens against it for secure positioning. The # UF19-960003 is a quantity of 2 each with combined weight capacity of 1,400 lbs.

There is also the option of Ultra-Fab Slide-Out Supports, # UF19-960001 that are 16" to 28" and # UF19-960002 with height adjustment of 21" to 37".

The Ultra-Fab Universal Carrying Bag for Slide Out Supports, # UF54FR is available for storing these components.

expert reply by: Michael R

0

Placement of Ultra-Fab Slide-Out Supports for Motor Homes
(click to enlarge)

Customer Image_1998 Monaco Diplomat 38 ft single slide
(click to enlarge)

Answer 1

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

view full answer...

Answer 2

I went out to the warehouse and took some measurements of the top of the Ultra-Fab Slide-Out Supports, #UF19-960002. The inside width is 4-3/4 inches. The outside width is 5 inches. The height is 1-3/8 inches and the front to back measurement is…

view full answer...

Answer 3

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 4

There are a couple potential reasons why the back Lippert Power Jack #LC298707 on your trailer won't extend or retract even with the motor running. It's possible that it may have been over-extended or something internally has been stripped or…

view full answer...

Answer 5

For your tongue weight, you are right about the Gen-Y Glyder like #325-GH-12001 not being the best option as that requires a tongue weight of at least 400 lbs to reap the benefits. So for your tongue weight below that, I recommend the RockerBall for…

view full answer...

Answer 6

The best option I have for you is the Phoenix Faucets RV Kitchen Faucet part #PF221304 for 4" mounting centers or part #PF211326 for 8" mounting centers. The Phoenix Faucets RV Kitchen Faucet unlike most other kitchen faucets has a…

view full answer...

Answer 7

I did some checking on the AquaFresh Exterior RV Water Filter Kit part #A01-1131VP and the micro rating is 20. The water filter kit reduces chlorine, sediment, and bacterial all while improving the taste and odor of your fresh water supply. The…

view full answer...

Answer 8

There are a few different styles of scissor jacks, but we definitely have some that can be used to replace the 5K jack on your 2020 Forest River Salem 33TS. For your application I recommend going with the Leveling Scissor Jack #JSC-30-IND which has…

view full answer...

Answer 9

While some manufacturers will say that a slide out jack isn't needed we've found that they do make a noticeable improvement to overall stability when parked which means a more solid feel when walking around in the RV and also less chance of…

view full answer...

How To Support Slide-Out On 1998 Monaco Diplomat

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching