Crossbar System for 2 Kayaks on a 2022 Mazda CX-5 with a Bare Roof

Question

Question:

Purchasing a 2022 Mazda CX-5 that has nothing on top. Should I have the dealer install the rails at least and get both rack and roof rails from you or leave as is and get everything from you? Looking for the cleanest way to be able to carry two kayaks

asked by: Nelson

1

Helpful Expert Reply:

For transporting 2 kayaks on your 2022 Mazda CX-5, we have great roof racks that work with your naked roof to achieve your goal. It is not necessary to install aftermarket rails to the roof. Also, from my available specs on your vehicle, you have fixed mounting points on your bare roof. Fixed mounting points are small locations on the side of your roof where you can directly bolt on a roof rack system,. These points are usually covered with a small plastic tab that can be removed to access the bolt holes. I always recommend using these bolt holes over roof racks that utilize door jamb clips because they provide you with a more secure setup.

For a great setup that uses your fixed mounting points, I recommend the following roof rack:

- Rhino-Rack Vortex Aero Crossbars # RRVA118B-2
- RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points # RRRCL4
- Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP48-BK

Not only do you receive a roof rack that utilizes fixed mounting points, you also receive the benefit of an extremely aerodynamic system that ultimately leads to a quieter ride and greater fuel efficiency. With the Vortex Aero crossbars, you receive 165 pounds of maximum weight capacity. As with all roof racks, I recommend consulting with your Mazda owner's manual to make sure your roof can accommodate the weight you wish to transport. I went ahead and attached a video that shows a similar Rhino-Rack setup that uses fixed mounting points on a 2016 model CX-5.

For the kayak carrier, I recommend the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs - J-Style - Folding # S512-S512X. Not only does this carrier attach perfectly to the Rhino-Rack Vortex Aero crossbars, it also comes with 4 cam buckle straps and 4 bow/stern ties to completely secure your 2 kayaks. To add theft deterrence, the best way to do so is to use the etrailer cable lock # e98891 to loop through the cradles and lock around the crossbars.

expert reply by: Bob C

1

Answer 1

The JetStream Rack from Yakima I previously recommended will be easy to remove and won't require pulling that rubber piece out of the roof gully. Once you assembly the feet and crossbars all you have to do is sit it on the roof, attach the…

view full answer...

Answer 2

The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis #MAL32VR. This would require the installation of a trailer hitch like the #76138 you looked at. More than likely you won't need this to…

view full answer...

Answer 3

I have great news, there are plenty of options for hauling kayaks, cargo boxes, cargo baskets, etc. on top of a 2021 Hyundai Tucson without factory side rails. If you have a bare roof without side rails then I recommend the Inno Aero Crossbar System…

view full answer...

Answer 4

Yes, there is a roof rack that will fit your 2023 Mazda CX-5. This mounts directly to the side of your roof without drilling and has more than enough capacity for a bike rack. You will want the roof rack by Rhino Rack and it includes the following…

view full answer...

Answer 5

I do have plenty of roof rack options for a 2019 Mazda CX-5 but since your vehicle has a bare roof you will need to install a system that attaches inside the door jamb. The tracks cannot be used on the roof of a vehicle as they require drilling and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 12

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Crossbar System for 2 Kayaks on a 2022 Mazda CX-5 with a Bare Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching