Font And Rear Replacement Covers For Solera Awnings

Question

Question:

Looking for the back cover for: Solera Awnings LC643923 What do you recommend?

asked by: Dan C

0

Expert Reply:

The correct rear cover for your front Replacement Cover for Solera Awnings # LC643923, is the Replacement Cover for Solera Awnings # LC643921.

expert reply by: Bryce D

0

Answer 1

I may have a solution for you, but without knowing exactly what type of awning this is I cannot confirm this will work. However, we do carry 2 awning end caps for Lippert/Solera awnings that I recommend checking out and seeing if they're the same…

view full answer...

Answer 2

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

view full answer...

Answer 3

The Replacement Cover for Solera Awnings #LC643923 fits a Solera Awning idler head. There would also be a drive head. You can use the drive head and other parts of the awning to try and determine what awning that you have. If you are unsure, you can…

view full answer...

Answer 4

The Replacement Cover for Solera Awnings part #LC643923 is for the idler head side. If you need the drive head side then the matching one for this is the Replacement Cover for Solera Awnings part #LC643922.

view full answer...

Answer 5

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

view full answer...

Answer 6

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

view full answer...

Answer 7

The install of the Replacement Cover for Solera Awnings #LC643923 is pretty simple. It's basically held on with just two screws that you'll easily be able to locate on the old head you have now. Since this cover does not come with screws…

view full answer...

Answer 8

We have idler head covers for the front and back of the Solera awnings. The part #LC289560 that you referenced is a drive head front cover though. For an idler head you'd want the part #LC643923 for the front and #LC289567 for the rear.

view full answer...

Answer 9

I spoke to my contact at Lippert and he told me the Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 would be the correct replacement cover for your power awnings. If you need the motor side cover, that will be the…

view full answer...

Answer 10

The easiest way to pick out replacement Solera awning head covers is to match the appearance of the cover to what you have now. So if your drive head front cover looks like the #LC289560 then this would be the correct front. If you have something…

view full answer...

Answer 11

As long as your idler head is the Solera Power Awning Idler Head - Black #LC672052 you can use Front Cover #LC643923 and Back Cover #LC643921. If you can send me a picture of your idler head I would be happy to confirm the correct replacement covers…

view full answer...

Answer 12

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

view full answer...