To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (355 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
After searching for a hitch , i found this product from etrailer. This trailer hitch was very reasonably priced and the shipment was very fast. After receiving the hitch, it only took about 30 minutes to install. This product is extremely well built. The welds are excellent, and i especially like the tow hook rings. I use this truck for a landscaping trailer and fishing boat.
Great product was a great company .
THANKS
Excellent product and superior service! It arrived in a couple of days and
an easy install.
Here is a helpful hint. To support the bumper I used two cargo straps (the
kind with no hooks). With the tailgate open drop the non buckle end between
the tailgate and body. Close the tailgate and wrap the straps under and
around the bumper and tailgate. Tighten them and the bumper is supported
with nothing in your way! Pretty slick, see attached photos
Keithmj
1/24/2015
Thanks for the tip on keeping the bumper up. It looks like a good way to do it. I will use this way when I install mine. Did you need help holding the hitch in place?
I received the hitch and it looked good. I took it out the box it came in. Went to install it and noticed one of the sides was bent in, this probably happened during shipping. I used a rubbed mallet to beat the side back out to get it to fit up against the bed rails. Other than that the installation was simple and easy.
Craig G.
11/1/2016
It works well. I haven’t had any problems with it Knock on wood The only problem I had was when I first got it and it was bent a little bit but I was able to straighten it and get it on.
Received the package and noticed that the contents had shifted creating a hole through the cardboard. The hitch, hardware and wiring harness appear to be ok. Until the hirch is installed i really won't know if there are any issues.
The hitch and harness look we made.
I installed the following on a 2006 Toyota Tacoma PreRunner. Watching all the related etrailer installation videos will give you an excellent idea of what to expect. Having an extra pair of hands removing the rear bumper and installing the hitch is a must. I admit it would have been nice to have a lift and impact wrench. ;) Otherwise pretty straight forward. The wiring harness and mounting brackets were just as simple. Again, just follow all the etrailer videos. See photo 1 for finished install. Sorry for the poor quality pic.
Works like a charm. I'm satisfied!
Side note: I used the longer receiver mounting bracket (18136) in conjunction with the 4-Pole Flat mounting bracket(18144). The wire connector is almost even with the back of the receiver tube. See photo 2.
* 13323 - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
* 118496 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
* 18136 - No-Drill Mount Bracket, Long
* 18144 - Mounting Bracket 4-Pole Flat
Because I am volunteering to help pull a trailer once a month for a local charity, this particular product definitely made the project a viable solution. The great ratings on this hitch, price, and turn around time on shipping were an obvious plus. I will be keeping etrailer bookmarked for any future towing needs. Wouldn't hesitate recommending etrailer to a friend.
When I ordered this trailer hitch for my 2012 Toyota Tacoma from etrailer.com it was expressed mailed free of charge! Three days later, there it was on my front porch! The etrailer video that explains how to install the hitch was easy to understand. Although it's recommended that two people install the hitch, I was able to do it myself using a car jack to hold one end up while I attached the other end. Total installment time by myself was 50 minutes. I was going to have a professional do the wiring, but etrailer makes it so simple that I may do that job myself at a great price!
Excellent video installation instructions; freaky-fast delivery; solid build. Great stuff!
Best part about this hitch is its made in the USA. It went on flawlessly and looks great. The finish is shinny powder coating and the fit is perfect. I also added a 4 pin wiring harness bracket that holds the connector up and out of sight.
The hitch receiver was taped at the end including to wrappings of paper cardboard around the crossbar. The box was beat up really bad by UPS and resulted a few minor dings and scratches on the crossbar and receiver. Yes, UPS has some responsibility for mishandling the package but etrailer did not pack this well in my opinion.
The quality of this hitch is top notch. Heavy duty, sturdy and well built. The installation instructions made the project very easy to install. This product was a perfect fit and I would definitively buy from this company again. Thanks etrailer and keep up the great work.
Fits like a glove! I also was replacing a rusted out bumper and the only additional pieces you may need if you are replacing an original OEM hitch, would be the left and right bumper brackets.
Wow ..Easy Installation of Trailer Hitch..1 2 3..it was done....needed it for wheelchair lift...for my daughter who has spina bifida...need to haul her around...needed hitch for carrier...Thank you...
Installation of this hitch was a breeze! And it can be done by one person! Instruccions were legible and clear and this hitch was cheaper than e*** or a*****! Plus backed by the guarantee im only buying my hitchs from etrailer.com!!
Exactly what I needed. This hitch and T-connect wiring kit was easy to install and looks great! I highly recommend these products and I will definitely buy from etrailer again!!
I ordered the hitch on Sunday night, and it arrived Wednesday afternoon. Installation was quick and easy, taking me just under an hour to do by myself. I'd order another hitch from and recommend etrailer.com to any of my friends.
The installation was straightforward, the instructions were very clear. I will definitely be recommending this company to my friends.
Fits like million dollar glove! Easy to install and easy to follow instructions.
Curt hitch fit my 2014 Tacoma perfectly .Took just under an hour to install.
There should be a rating higher than "Excellant" for the two products I bought, trailerhitch and wiring harness....
Both of these were so easy to install I was "blown away" by the ease of installation...
But I do have ONE HUGE suggestion....Either include a CD-ROM for the installations, or at least include something that says go to your web site and watch the videos. Your step-by-step video instructions were awesome. The written directions tell you to removr two bolts and loosen three and then mount the hitch, NO WAY, it's much easier to do it like your video tells you to. I took my laptop out to the garage and watched the video during the install and could pause it and do that step, pause and restart :) :) :) LOVED IT......
Butch D.
4/9/2014
Loved the product, the install was so easy...........traded thetruck in on a 2014 Toyota Tacoma in November of 2013........
Received the trailer hitch on time. A great product and was easily installed by me. This is my second hitch from E-Trailer (first hitch was for a 2009 Honda CRV), and the service then was great too. Highly recommend E-Trailer - and great installation instructions too!
Tom A.
7/18/2015
Great! No problems at all. Used on my 2010 Toyota Tacoma pickup to tow a 13 Casita travel trailer on a trip from Kinsale, VA to Argentia, Newfoundland Canada! A trip of about 6000 miles. The hitch was very easily installed and the instructions were very thorough. Thanks much!!
The hitch and suggested wiring harness were a perfect fit for my 2009 Toyota Tacoma. etrailer, as always was, was great to work with. Shipping was very fast and the packaging was excellent!
Well done, etrailer!
Our first order received was missing two of the parts ordered. Once we received the rest, the pins were missing from it. So all in all the parts are great once installed. The shipping dept. may need some improvement.
I bought the Kurt trailer hitch and had it installed on my Toyota Tacoma. Not a problem at all installing it. Fit right in. It has been used to take a sailboat to water five times this year. Great product!
J.g.
11/29/2017
It works perfectly well. Not a hitch forgive the pun!
Excellent paint, excellent fit, easily bolted on with a friends help, and 3 beers....didn't need to remove bumper or any cutting/welding. perfect, perfect, perfect product. start to finish was 1 hour in my driveway.
I ordered the Curt Trailer Hitch Receiver for my 2005 Toyota Tacoma Access Cab. My Tacoma does not have the towing package so I ordered it primarily for carrying bicycles.
The free shipping was great as I received the hitch within three days.
The instructions called for a two man installation. I am a small person at 5'4" and 120 lbs and was able to perform the install myself with an ATV jack with a plywood board mounted to it.
Before the hitch arrived, I removed the rear bumper as instructed. This gave me an opportunity to clean out all of the leaves and spider nests.
When the hitch arrived, I lifted it in place with the ATV jack and followed the instructions. The hitch mounted into place with very little effort and the bumper mounting pins did not have to be removed.
Mounting of the bumper using the ATV jack was very easy. Since I don't have the towing package, I did not have to perform any wiring.
The total time spent was equivalent to a half day. This included taking the time to clean all of the parts removed from the pickup.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin M.
4/13/2018
Thanks for the follow up. I have used this trailer hitch extensively, and it is a great product. Its also a pleasure to deal with a company that genuinely cares about its customers. You will get all my business as I need more products, and I will let all my friends know about etrailer also. Have a great day.