Availability Of Replacement Covers For Solera Power Awning Idler Head

Question

Question:

I have a 2021 Forest River Cherokee 274WK travel trailer and I broke the cover on the awning idler head. Is there an option to buy just the front and back cover, or do I need to buy this Item # LC672052? Thank you.

asked by: Shawn W

0

Expert Reply:

As long as your idler head is the Solera Power Awning Idler Head - Black # LC672052 you can use Front Cover # LC643923 and Back Cover # LC643921.

If you can send me a picture of your idler head I would be happy to confirm the correct replacement covers for you.

I included videos for each of the covers mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

While you can still use the Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR without the weight distribution bars, I recommend using a lighter set of spring bars. You can use the Replacement Spring Bars #BLU94XR with a trailer that has…

view full answer...

Answer 2

In order to separate two awning head covers such as the Solera Awning Plain Drive Head Front Cover part #LC289560 and the Solera Awning Plain Drive Head Back Cover part #LC289561 you'll need to remove the screws which are accessed from the back…

view full answer...

Answer 3

For the Replacement Cover for Solera Awnings #LC643923 for the idler head, and the Replacement Cover for Solera Awnings #LC643922 for the drive head, you can use the: -Replacement Solera Manual Awning Head Cover Fastener #LC266156, which are #6 x…

view full answer...

Answer 4

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

view full answer...

Answer 5

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

view full answer...

Answer 6

The install of the Replacement Cover for Solera Awnings #LC643923 is pretty simple. It's basically held on with just two screws that you'll easily be able to locate on the old head you have now. Since this cover does not come with screws…

view full answer...

Answer 7

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

view full answer...

Answer 8

I spoke to my contact at Lippert and he told me the Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 would be the correct replacement cover for your power awnings. If you need the motor side cover, that will be the…

view full answer...

Answer 9

The easiest way to pick out replacement Solera awning head covers is to match the appearance of the cover to what you have now. So if your drive head front cover looks like the #LC289560 then this would be the correct front. If you have something…

view full answer...

Answer 10

We have idler head covers for the front and back of the Solera awnings. The part #LC289560 that you referenced is a drive head front cover though. For an idler head you'd want the part #LC643923 for the front and #LC289567 for the rear.

view full answer...

Answer 11

The Replacement Cover for Solera Awnings #LC643923 fits a Solera Awning idler head. There would also be a drive head. You can use the drive head and other parts of the awning to try and determine what awning that you have. If you are unsure, you can…

view full answer...