LMX Industrial Strength L11390 Thickener and Viscosity Specs

Question

Question:

What is the thickener type used in the LMX grease L11390? Is it a Litium complex? Also, what is the vicosity index?

asked by: Eric M

0

Expert Reply:

The LMX # L11390 red grease is a lithium complex grease that has a # 2 viscosity index.

expert reply by: Mike L

0

Answer 1

Replacing the passenger tires you have on your trailer as soon as you can is a smart idea as passenger vehicle tires are not rated properly for trailer use and they would be very likely to fail. In the tire size of ST225/75R15 the best option is the…

view full answer...

Answer 2

The ST225/75R15 Kenda Karrier #AM10303 Load Range E tire that you referenced does have a Speed Rating of M (81 mph). Please note that you will want to keep the cold psi rating at 80 psi to achieve the 2,830 lbs max load rating. This will also allow…

view full answer...

Answer 3

Kenda trailer tires are primarily made in China like most trailer tires. The only Radial trailer tires that I'm aware of that are made in the United States are the Goodyear Endurance line. Carlisle has a bias ply line of tires made in the States,…

view full answer...

Answer 4

Most trailer tires aren't rated for 80 mph plus speeds. I'd be willing to bet that your tires are failing from exceeding the speed rating or they are underinflated. The Kenda tire part #AM10303 has the highest trailer tire speed rating we…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

The LubriMatic LMX Industrial Strength Grease, part #L11390 comes in a 14oz. cartridge designed for use with a grease gun. It is our Industrial Strength grease, and is formulated to endure extreme pressure, outrageous heat or cold, as well as intense…

view full answer...

Answer 7

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 8

The great thing about LMX red grease like the part #L11390 is that it will be compatible with basically whatever grease you have in the hubs of your Forest River Rockwood and definitely works with what you have now. I'd go with this grease and…

view full answer...

Answer 9

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer…

view full answer...

Answer 10

When adding grease like the #L11390 you want to pump the grease slowly and rotate the hub. You will continue to pump the grease until you begin to see grease come out of the front. If you're replacing old grease, you will continue to pump until…

view full answer...

Answer 11

Hey Eugene, the LMX RED grease like part #L11390 is the best option. It's the most heavy duty, waterproof, and is compatible with basically all greases. I would be cautious not to over fill the hub though as it's pretty easy to blow out seals…

view full answer...

Answer 12

The Lubrimatic LMX Industrial Strength Grease #L11390 that you referenced includes just one 14-oz tube/cartridge of grease. We do not have this product available as part of a larger case. I have attached a short video review that you can check out as…

view full answer...