Trailer Light Similar to RVIL21 that is LED

Question

Question:

Do you offer Item # RVIL21 with an LED board instead of a bulb?

asked by: All M

0

Expert Reply:

The most similar interior light we have to the # RVIL21 that uses LED instead is the part # LIL9L which has a slightly different shape but is essentially the same assembly.

expert reply by: Jameson C

0

Answer 1

I can help you find the correct parts for your EZ Loader trailer. Based on the photos you submitted, the #AL91RB will fit your style connector on your trailer. The amber light is #AL82AB, and the grommet you will need is #A91BOB. All these items come…

view full answer...

Answer 2

I do have a way for you to increase the visibility of your t-load truck bed extender but we currently do not have a set of lights that are designed to work with your setup. Instead, the best option I have for you would be to use a reflector like the…

view full answer...

Answer 3

I have just what you are looking for in the Peterson Quick-Mount Rectangular Trailer Reflector w/ Chrome Bezel part #B484A which is a rectangular amber reflector with chrome bezel.

view full answer...

Answer 4

My contact at Redline told me that the outside diameter of the Chrome Trim #SA1012ET would be right at 5/16 of an inch and the inner diameter 1/8 of an inch. He said the trim isn't a perfect circle so the dimensions fluctuate a little bit.…

view full answer...

Answer 5

No it does not have an adhesive backing. It has an open slit that gets pressed onto an edge.

view full answer...

Answer 6

The Chrome Edge Trim - 50' Roll #SAT012ET is a plastic edging that is flexible and has the adhesive for permanent installation. It fits up to 1/8 inch thick material. It is not chrome plated but rather has a permanent chrome finish.

view full answer...

Answer 7

Yes, you can use the Chrome Edge Trim #SAT012ET to fill where the fenders meet the trailer body in the way you are describing.

view full answer...

Answer 8

Usually a light's actual part number is found on the base portion rather than the lens. I could not find any lights or light parts using the code you provided, Z4-738-WC. But we do have lots of replacement light as well as replacement lens parts.…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Trailer Light Similar to RVIL21 that is LED

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching