Does the etrailer Hitch for a 2014 Subaru Outback Wagon Fit Models with Dual Exhaust

Question

Question:

Hi, I see on all yr videos for the e98847 hitch, all the vehicles only have one exhaust. My 2014 3.6 has dual will this one fit? I think I had this very same one I got from yr company for my 2010 3.6. Im just double checkin b4 I buy.

asked by: Douglas K

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver part # e98847 which is a fit for a 2014 Subaru Outback Wagon does indeed fit models with dual exhaust.

expert reply by: Conner L

0

Answer 1

For your 2010 Subaru Outback Wagon 3.6R with dual exhaust we have the Draw Tite hitch part #75673 which we know is a fit. We've had a few customers with the 3.6R model that has dual exhaust like yours come back and state that they were able…

view full answer...

Answer 2

The Draw Tite Hitch part #75673 is a carry over from the 2017 Subaru Outback to the 2018 model. Draw Tite was able to get their hands on this vehicle very early to test fit and confirm the fit. I attached an installed picture for you to check out…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Does the etrailer Hitch for a 2014 Subaru Outback Wagon Fit Models with Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching