Hitch Recommended For Carrying Bike Rack on 2022 Acura RDX

Question

Question:

Which hitch for a 2022 Acura RDX? Need for bike rack.... THX!

asked by: Kim

0

Expert Reply:

The Curt # C95CR Class III hitch you'd looked at would be a great choice for your 2022 Acura RDX. The hitch has a 350 lb tongue weight capacity, so it'll handle the weight of your bikes and the rack they're carried on with no problem.

expert reply by: Mike L

0

Answer 1

The Curt #C95CR, which will fit your RDX, can handle wheels up to 18" in diameter, but not over that. So yes, your spare will be fine as it is a 17" wheel. However, as the regular wheel on your 2022 Acura RDX with the Advance package is…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C95CR will fit the trim package on your 2022 Acura RDX. With the factory trim piece the hitch will not be very hidden. The hitch does have a simple bolt-on installation process and requires no drilling or…

view full answer...

Answer 3

I have what you need! I went ahead and pulled the Curt Hitch #C95CR from the warehouse to measure for you. From the front of the receiver tube, the center of the pinhole is 1-7/8". From the rear of the receiver tube, the center of the pinhole is…

view full answer...

Answer 4

Though I can confirm the Curt #C95CR will definitely fit your 2021 Acura RDX and is designed to fit all package/trim options, we have not done an install on this vehicle as of yet. With that being said, we do not have the needed measurement…

view full answer...

Answer 5

I have a solution for you. While the Curt Class 3 Trailer Hitch Receiver for 2" Hitches #C95CR will fit your 2020 Acura RDX, it will be more exposed than your factory hitch you have installed now on your vehicle. Unfortunately, there are no…

view full answer...

Answer 6

While there won't be a difference in terms of corrosion resistance between the Curt Trailer Hitch Receiver #C95CR and Draw-Tite Max-Frame Trailer Hitch Receiver #76268 for your 2021 Acura RDX, I recommend the latter, the Draw-Tite #76268. The…

view full answer...

Answer 7

The crossbar of the Curt 13423, which we refer to as part #C95CR is exposed, just like the Draw-Tite #76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt #C95CR would look almost…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Hitch Recommended For Carrying Bike Rack on 2022 Acura RDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching