Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(76 reviews)
Price: $169.51
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C95CR
Retail:$265.95
Our Price: $169.51
You Save: $96.44
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (76)
- Q & A (0)
- Photos
CURT Trailer Hitch - C95CR
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Not rated for use with weight-distribution systems
- Limited lifetime warranty
Note: Hitch will fit models with an 18 or smaller spare tire under vehicle larger spare tires will not be able to be stored under the vehicle.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13423 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Acura RDX
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C95CR
Average Customer Rating: 4.5 out of 5 stars (76 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: John4mLA03/18/2024
It is well made, works as advertised, and reasonably priced. I was able to install it following the videos etrailer.com provided. I would have no problem recommending this trailer hitch to a friend.
by: Gerard 04/14/2024
The trailer hitch receiver is well made, robust design and easy to install. I am very pleased with the product!
by: Douglas03/19/2024
exactly what i wanted at a good price. Unfortunately, i could not install it mayself - lowering the exhaust was more challenging than i expected, but otherwise i am very happy with the quality and the performance of the hitch.
by: Jimmy03/15/2023
2022 Acura RDX
Installed on 2022 Acura RDX. The construct of the hitch required removing the muffler from the hangers to fit the hitch assembly past them. A little difficult for a do-it-yourselfer, but do-able. Fits tightly. Extends out from the vehicle a little more than desired.
Received in damaged boxed with the hitch hanging out of the box. Could have been packaged better and I'm sure handled better by UPS. The hitch frame was scratched but not damaged and did not hinder the install.
by: Aden Karr02/29/2024
Very tight and difficult to thread the screws. You actually don't need to remove the exhaust muffler. Just hold it so that the receiver is pointing down, squeeze up the sides through between the muffler and the plastic bumper lip, once through rotate back up to a horizontal position.
by: Stephen 04/22/2024
Shipping was quick and the hitch fir as advertised
by: NKC MO07/18/2022
2022 Acura RDX
Installed Hitch on 2022 Acura RDX Advance package with factory installed spare tire. This is the second hitch I have purchased and installed from etrailers. Shipping was fast, but as many others have said box arrived with portions of the hitch exposed outside of the box. Hitch had several scratches in powder coat which I covered with spray gloss paint. Reason for 1 star removal.
Hitch was fairly easy to install after removing spare tire and dropping the 2 driver side exhaust hangers as there was just not enough room to get hitch into place over the muffler otherwise. A second set of hands is best to position hitch and get bolts started without cross threading. Factory spare tire fits after hitch - it is a very tight fit against the receiver but it does fit. I have not tried the hands free tailgate sensor, as never used it so wasn't worried about it. (lesson learned, turn it off in the car settings so you don't keep opening and closing the tailgate while installing the hitch!)
Hitch extends 2.5" from the bumper, but as the back of the hitch receiver is up against the spare there is no way to have it extend less. The OEM option uses a new bumper trim piece which hides some of the extension. I was OK with the look as dealer wanted nearly $1,500 for parts and labor. Images show dimensions, including dimension to the spare at the top of the receiver.
by: Gerald 11/28/2023
Acura RDX
Good, Should have receiver hitch half inch lower. Rubs the bumper.
2021 Acura RDX.
by: Darik08/08/2023
Great hitch! It was a perfect fit! Made for my car and it installed easily. etrailer delivered it fast and was easy to work with. It has been year and no rust or scratch. Pictures are a year later.
by: David 08/10/2023
2023 Acura RDX
Solid pricing for the trailer hitch. When I had a question to verify fit for new vehicle, the 'live chat feature' worked quickly and efficiently to confirm correct product. Product arrived quickly and was installed without any problems.
by: Patrick08/03/2023
Excellent,The hitch fit very well
by: Patrick04/11/2024
Awesome hitch. Great price, fast shipping. I will recommend etrailer
by: Omar 07/23/2023
Received the hitch receiver on time and installation was simple. Thank you E-trailer.
by: Mike05/04/2023
The packaging could use work, the hitch poked holes and got scratches on arrival. Etrailer could wrap the pointy areas to avoid this.
by: Anatoliy04/25/2023
Two out of four installation bolts should be shorter. It sticks out more than necessary and covers sensors for foot kick trunk opening. Otherwise, nice look and good quality.
by: Bob 08/25/2023
2023 Acura RDX
Perfect fit for our 2023 RDX aspec,,easy installation
by: Jeffrey04/25/2023
Follow the directions and total install time less than 60 minutes. Hitch was poking through the box when delivered. However, there was no damage to the hitch.
by: Art 09/24/2023
Really happy with this product. It is incredibly solid and secure. Much better than the others I've purchased in the past.
by: Gary 06/18/2023
2019 Acura RDX
Perfect fit. Just wish the receiver didn't stick out so far
by: Raymond09/24/2021
2019 Acura RDX
The instructions say you have to remove the spare to install the hitch, but it does not tell you that once the hitch is installed you cannot reinstall the spare.
The slots in the hitch that correspond to the holes/nuts in the chassis were too short. I had to extend the slots by about 3/16 to be able to get them in.
The flanges that fit inside the chassis were too wide to allow the hitch to fit in between the anchoring locations. I had to use a hand sledge to bend them so it would fit.
All in all a bad experience. For something that should have taken 30 mins to install, it took nearly 90 minutes and resulted in my losing my spare tire!!!
Sierra K.
10/5/2021
This fits with factory temporary spare tire which is normally 18 inches. The other issue sounds like flex which can be fixed with the tips in this article:
Helpful Links
by: Joe03/06/2022
My hitch went all the way to east coast before coming back to Nevada. As a result the box was full of holes. The powder coating was worn thru in several places. The holes did not allow for me to install the mount. After filing the holes I finally got the hitch mounted. Now there is no way to mount the spare tire.
Heather A.
3/11/2022
I recommend to use a rust-oleum spray paint to cover any scratches to prevent corrosion in the future but I will have customer service reach out to you about the damage. This particular hitch only fits with spare tires that are 18 inches or smaller.
by: Craig02/05/2023
So far good, but the box came in with 4 big hole. Inspected the hitch no damage but have to wait to a warmer day to install the hitch and see if anything bent
by: Ken 07/17/2022
Customer service answered my questions thoroughly and quickly and the hitch receiver was shipped quickly too. The hitch fit perfectly, everything lined up. Installation was straightforward. I only had to lower one side of the exhaust to get the hitch to slide into place. The exhaust hangers were the toughest part of the job. I was able to remove them by hand once I applied some lubricant. An extra set of hands would have made it a little easier, but you can install this with one person. I am very pleased with etrailer's service and product.
by: Kevin07/30/2022
No mounting screws or washers in the box, just the hitch.
Jenny N.
8/8/2022
We recently sent you replacement hitch hardware and were wondering if you had any feedback about the hitch for other shoppers? We look forward to hearing from you.
Kevin
8/13/2022
Yes - received- very happy now - thank you
by: Karl04/10/2022
It took a bit if persuasion to get the hitch to fit. The mounting points weren't aligned. It works and is solid.
Also worthy to note that the packaging is terrible... It arrived in a cardboard box with no protection. 3 holes punched through where the brackets are and were all obviously scratched up as a result.
It doesn't affect the performance of the hitch but if I'm buying something new, I just feel like it should be free of flaws.
25
118
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Pinhole Measurement from Front and Rear of the Curt Hitch # C95CRI have what you need! I went ahead and pulled the Curt Hitch # C95CR from the warehouse to measure for you. From the front of the receiver tube, the center of the pinhole is 1-7/8". From the rear of the receiver tube, the center of the pinhole is 3-3/8". I went ahead and attached a diagram that shows this dimension.
view full answer...
- Will The Curt C95CR Hitch fit A 2022 Acura RDX Advance With 19" Wheels?The Curt # C95CR, which will fit your RDX, can handle wheels up to 18" in diameter, but not over that. So yes, your spare will be fine as it is a 17" wheel. However, as the regular wheel on your 2022 Acura RDX with the Advance package is 19" and came with 235/55 R19 Continental CrossContact LX Sport tires, which measure 29.2" in diameter, it will need to be stored in the cargo area if you ever have to run the spare tire.
view full answer... - Does Curt Hitch C95CR fit 2021 Acura RDX with Technology PackageI checked with Curt and the hitch part # C95CR that you referenced does fit your 2021 Acura RDX with the technology package.
view full answer... - Does the Curt Hitch # C95CR Fit on My 2021 Acura RDX with a Spare Tire?Yes, the Curt Hitch - 2" # C95CR will fit with your spare tire as long as it is the standard size (18 inches). For installation, you will have to temporarily lower the spare tire, but you will be able to reattach the tire after the # C95CR is installed on your vehicle.
view full answer... - Recommended Trailer Hitch Receiver For 2021 Acura RDX With Advance PackageI confirmed with my contact at Curt that the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C95CR will fit all models of the 2021 Acura RDX and will not interfere with the spare tire on models with the Advance Package. The instructions do state that removal of the spare is required for installation, but you can then re-install the spare after the receiver is installed. The only issue you may run into is usage of the rear kick sensor; it looks like you may have to kick to one...
view full answer... - Will The Curt Hitch Receiver Fit A 2022 Acura RDX With A Factory Trim PieceThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C95CR, will fit your 2022 Acura RDX. There are some issues that you should be aware of before installation. The first thing is your spare tire will have to be 18" or smaller in order to install this hitch receiver. If you have a larger spare tire, it will not be able to be stored underneath your vehicle. In addition, you may lose the functionality of your hands-free lift gate due to sensor interference. With regards...
view full answer... - Will the Curt Trailer Hitch Receiver # C95CR Fit With the Factory Trim Package on My 2021 Acura RDXThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C95CR will fit on 2021 Acura RDX, but with the factory trim piece it will not be very hidden. This receiver does offer a simple bolt-on installation process and requires no drilling or welding. Instructions and hardware are included.
view full answer... - How Far Recessed Is the Hitch Pin Hole On Curt Hitch for 2021 Acura RDXThe Curt trailer hitches like the Curt Trailer Hitch Receiver part # C95CR for a 2021 Acura RDX all measure 2-1/2" from the center of the hitch pin hole to the end of the receiver. This will allow you to use pretty much any bike rack.
view full answer... - Hitch Recommended For Carrying Bike Rack on 2022 Acura RDXThe Curt # C95CR Class III hitch you'd looked at would be a great choice for your 2022 Acura RDX. The hitch has a 350 lb tongue weight capacity, so it'll handle the weight of your bikes and the rack they're carried on with no problem.
view full answer... - Will The Curt Hitch C95CR Fit A 2021 Acura RDX With The Technology Package?Though I can confirm the Curt # C95CR will definitely fit your 2021 Acura RDX and is designed to fit all package/trim options, we have not done an install on this vehicle as of yet. With that being said, we do not have the needed measurement requested, unfortunately. I double checked with Curt and there is no issue with the Technology Package, but you will need to find the sweet spot for the liftgate sensor on the bumper. The receiver opening will be right in the middle, but you can go...
view full answer... - Best Receiver Hitch for 2022 Acura RDXCurrently there is only the one option, the Curt Trailer Hitch Receiver, # C95CR. This is a class III hitch with a 2"x2" receiver opening and a maximum gross trailer weight of 3,500 lbs. with max tongue weight of 350 lbs. It is a fully welded trailer hitch receiver that bolts onto your Acura RDX's frame with no welding required.
view full answer... - Does Curt Hitch for 2021 Acura RDX Require Hitch CoverThe Curt hitch part # C95CR is a fit for your 2021 Acura RDX and does not require any type of additional cover to install.
view full answer... - Is a Concealed Style Hitch Available for 2020 Acura RDXThe crossbar of the Curt 13423, which we refer to as part # C95CR is exposed, just like the Draw-Tite # 76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt # C95CR would look almost identical.
view full answer...
- Recommended Trailer Hitch for A 2022 Acura RDX AdvanceThe American made Curt Class III Hitch Receiver # C95CR is a confirmed fit for all models of the 2022 Acura RDX, including the Advance package. With that said, 19" wheels cannot be stored under the vehicle as the hitch will sit inside of the frame and will take up too much room for it to fit properly. As to the kick sensor, I have never seen one ever be completely negated. You will need to find the sweet spot on either side of the receiver as it will sit in the same place as the sensor. The...
view full answer... - Curt or Draw-Tite Trailer Hitch Receiver For 2021 Acura RDX to Resist Scratches/CorrosionWhile there won't be a difference in terms of corrosion resistance between the Curt Trailer Hitch Receiver # C95CR and Draw-Tite Max-Frame Trailer Hitch Receiver # 76268 for your 2021 Acura RDX, I recommend the latter, the Draw-Tite # 76268. The reason why is that the Curt has a slightly glossier finish than the Draw-Tite, so scratches are going to be a bit more noticeable. These two hitches are otherwise exactly the same, with the same installation, and as of this writing there are no...
view full answer... - Will Draw-Tite Hitch Fit 2023 Acura RDXWhile Draw-Tite does stop their fits at 2022 For the Acura RDX, I agree with your assessment that the 2023 Acura RDX is perfectly compatible with the 1-1/4" Draw-Tite Trailer Hitch # 36114. Like you mentioned, the Curt Hitch # C95CR has the exact same mounting, is verified to fit a 2023, and there have been no style changes from the 2022 to 2023 RDX. So, while I have to say that Draw-Tite doesn't officially say the # 36114 will fit your 2023 RDX, I am highly confident there won't be a...
view full answer... - Will the Curt Class 3 Hitch # C95CR Fit with the Factory Trim Piece on a 2020 Acura RDX?I have a solution for you. While the Curt Class 3 Trailer Hitch Receiver for 2" Hitches # C95CR will fit your 2020 Acura RDX, it will be more exposed than your factory hitch you have installed now on your vehicle. Unfortunately, there are no photos of # C95CR installed on your vehicle on our website, the manufacturer website, or the instruction manual. However, I did attach a photo of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76268 (this hitch is also...
view full answer...
- Trailer Hitch Recommendations For 2019 Acura RDX To Carry Etrailer Cargo CarrierBoth the Draw-Tite and Curt 2" Class 3 receivers will be able to accommodate the 24x60 etrailer Cargo Carrier # e98874. I do recommend going with the Curt Class 3 Trailer Hitch Receiver # C95CR as this is made in the USA and typically will have higher quality powder coat paint to do a better job of resisting rust and corrosion. Another reason to go with the Curt is because Draw-Tite states that spare tires 18" and smaller will fit, but Curt states that all sizes will work.
view full answer... - Will the Curt Trailer Hitch Receiver Fit a 2022 Acura RDX With Spare TireThe Curt Trailer Hitch Receiver # C95CR will fit your 2022 Acura RDX as long as your spare tire is 18" or smaller. If you have a larger spare tire you would have to remove it or replace it with a smaller tire to be able to install the hitch. This is a Class III hitch with a 3,500 lb maximum gross trailer weight and 350 lb max tongue weight. The hitch has a 2" receiver and comes with a limited lifetime warranty. If you plan on doing some towing you will want to add a 4-way to power your...
view full answer... - Curt Hitch and Identifying the 12 Volt Power Provision in a 2021 Acura RDXI have an explanation for your 12 volt power precision concern and a great hitch for your 2021 Acura RDX In order to determine the correct trailer wiring harness for your 2021 Acura RDX - the option for +12-Volt Power Provision or without - you can check out the 8-pin connector on the driver's side interior trim panel. I have attached a photo to help you. I have also linked some installation instructions. Once you see the 8-pin connector, check to see the number of red wires going INTO...
view full answer...
- Best Trailer Hitch For Carrying A Bike Rack On A 2022 Acura RDXI am glad to hear the Hollywood Racks Destination Bike Rack # HR4000 is working out well! this has been a very well liked rack and personally, I have not had a single complaint about it. With that said, you will want the American made Curt # C95CR hitch for your 2022 Acura RDX. This will require no drilling or trimming to get installed and will be a pretty quick and easy install. This will have absolutely no problem carrying your bike rack either.
view full answer... - Recommended Trailer Hitch for 2021 Acura RDXFor your 2021 Acura RDX I recommend the Curt Trailer Hitch Receiver # C95CR. This Class III hitch has a 2" receiver and is assembled in the USA. I like this one over the other available options because we have found the gloss black powder coat finish on the Curt to be a bit thicker and hold up better. If you plan on doing some towing, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118800. This wiring harness plugs into existing wiring so you...
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring Harness For Towing Trailer With a 2021 Acura RDXFor your 2021 Acura RDX I recommend the Curt Trailer Hitch Receiver # C95CR. This is a class III 2" receiver that will allow you to have more options for your hitch mounted accessories such as bike racks and cargo carriers. The receiver attaches to factory weld nuts that you already have in your frame. The Tekonsha T-One Vehicle Wiring Harness # 118800 will allow you to connect to the factory wiring on models with the with plus 12-volt Power Provision. If you do not have the 12-volt provision...
view full answer... - Will The Curt Trailer Hitch Receiver # C95CR Fit a 2022 Acura RDX A-Spec Advance? Yes, the Curt Trailer Hitch Receiver # C95CR will fit your 2022 Acura RDX A-Spec Advanced. While we have not completed the installation in our shop on your exact vehicle the installation will be the same as the A-Spec we had in our shop and I linked the install video below. I recommend installing a 4-way when you install the receiver. To determine if your RDX has the 12-Volt Power Provision you will need to access the 8-pin connector inside your Acura to see if it has 2 red wires in the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Chris R
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Noah M
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
John A
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/5/2023
Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Helpful Links
faq-rust-prevention-maintenance.aspx