Stud Diameter of Bulldog Winch Shut Off Switch part # BDW20248

Question

Question:

I was wondering what size the lug is for attaching the battery cable? 3/8inch or 5/16?

asked by: Nick L

0

Expert Reply:

The studs of the Bulldog Winch Shut Off Switch part # BDW20248 are 5/16 inch in diameter.

expert reply by: Jameson C

0

Answer 1

The Bulldog Winch 500 Amp Shut-Off Switch - Metal Housing #BDW20248 will operate up to and at 500 amps whether it is intermittent use or continuous. The 500 Amp battery disconnect switch should only be used for powering on and off the main power…

view full answer...

Answer 2

Since your battery terminals are exposed in your 2015 Keystone Raptor 5W Toy Hauler what you can do is mount it to the side wall like in the attached picture of this battery converter. You'll want to connect the Seaflo Battery Disconnect…

view full answer...

Answer 3

If you are a frequent user of a medium to heavy duty winch then yes it is a good idea to carry a separate battery with you. Many times we see the auxiliary battery mounted within the engine compartment if there is space available when you have the…

view full answer...

Answer 4

Due to how the Bulldog Winch 500 Amp Shut-Off Switch #BDW20248 attaches to the wiring using studs that you could use basically any ring terminal. This is rated for 500 amps though so a very heavy gauge wire was intended to be used so I'd…

view full answer...

Answer 5

We have two options for you to consider. We have the Bulldog 500 amp switch part #BDW20248 which would work well or we have the 400 amp switch part #BDW20247 instead which has a removable key on it which would act as a theft deterrent possibly. Both…

view full answer...

Answer 6

The bracket of the 200 amp Bulldog Winch Master Power Shut-Off Kit #BDW20079 will not fit with the Bulldog Winch 400 Amp Shut-Off Switch - Removable Key #BDW20247. The Shut-Off Switch #BDW20247 does have holes on its base that are spread 2-1/2 inches…

view full answer...

Answer 7

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 8

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 9

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…

view full answer...

Answer 10

To install a 7-Way harness on your 2023 Ford Bronco without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle…

view full answer...

Answer 11

I would be happy to help! Since your 2018 Keystone Cougar 311 RES 5th wheel with tandem 5200lb Dexter axles has the Dexter 072-097-00 leaf springs currently installed the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long #e34SR…

view full answer...

Answer 12

There are 2 different capacities independent of each other though related. Tongue weight is the downward force or weight on the trailer hitch. So it is pushing down at the back of the vehicle. The gross trailer weight is the weight of whatever it is…

view full answer...

Stud Diameter of Bulldog Winch Shut Off Switch part # BDW20248

Product Page this Question was Asked From

Continue Researching