Replacement Control Unit for Kwikee Steps with Control Number 909510000

Question

Question:

I need to replace my Step controller and several come up when I search for the Part number. Can you please tell me which is the correct one for the following: Kwikee Products PN: 1800707 REV OE Warranty PN: 909510000 DATE CODE: 09F04I

asked by: Jeff

0

Expert Reply:

Thank you for all of the information. Given the information you provided, the Replacement Control Unit for Kwikee Electric RV Steps # LC379146 is the correct replacement control for your steps.

expert reply by: Scott S

0

Answer 1

We have the correct controller but the Kwikee Step Control Step with Override Control Panel #LC381020 would not be the correct controller for you. The correct replacement controller for your 909510000 is the Replacement Control Unit for Kwikee…

view full answer...

Answer 2

The issue you are having your Kwikee Electric Steps could be attributed to a few different issues. The first issue could be that the override switch is not wired properly. I have attached for you below a photo that shows how the steps/switch should…

view full answer...

Answer 3

The back wire on the Replacement Control Unit for Kwikee Electric RV Steps part #LC379146 is for an under-step light which is only available on select models. If you do not have the under-step light then you would simply just not connect the wire. I…

view full answer...

Answer 4

You would need to know when your steps were manufactured to know if the Kwikee 9510 Control for IMGL/9510 Step Control #LC379146 would work for you, because it is designed to be used with "pre-IMGL" step units that were manufactured from…

view full answer...

Answer 5

The issue with the Kwikee Steps on your Itasca Navion IQ is actually the motor, not the controller. The problem with the motor is that it is not arching out which is then what sends the signal for the steps to shut off. Therefore, the Replacement…

view full answer...

Answer 6

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Answer 7

The issue you described could be either a bad door switch or a bad control module assuming you have checked all of your connections. In order to determine which of the above is causing your problem you will want to unplug the 4-pin connector for the…

view full answer...

Answer 8

The correct replacement control unit for your Kwikee 909510000 is the Replacement Control Unit for Kwikee Electric RV Steps #LC379146. This is a direct replacement for your current control unit as this is the same part.

view full answer...

Answer 9

Thank you for all of that information, I was able to use the PN:909510000 (Kwikee part number) to locate the correct replacement control unit for your steps. The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 is the correct…

view full answer...

Answer 10

Thank you for all of the information provided. Based on that the Replacement Control Unit for Kwikee Electric RV Steps #LC379146 is the correct replacement control for your steps on your 2008 American Coach Tradition.

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Replacement Control Unit for Kwikee Steps with Control Number 909510000

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching