Trailer Hitch and 7-Way for Towing with 2019 Lexus 350RX

Question

Question:

Want to install a hitch and a 7 way and way pole connector. What products do you recommend to pull a 3,000 lb boat?

asked by: Tim P

1

Helpful Expert Reply:

The first thing you need to tow a trailer with your 2019 Lexus RX 350 is a trailer hitch like the # C73DR which is mostly hidden and has great towing capacities. Then for trailer wiring you'd need to start with a 4-way like the part # 118255 which is a confirmed fit. If the trailer does not have brakes you'd need the part # 37185 to convert to a 7-way or the part # ETBC7 with a brake controller like Brake EVN # TK63VR for if the trailer has brakes.

expert reply by: Jameson C

1

Answer 1

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could…

view full answer...

Answer 2

The Draw-Tite hitch model #75153 will sit right below the bumper on your 2007 Lexus RX350, so your 17 inch measurement from the underside of the bumper to the ground should be pretty close to the installed hitch height. If you are measuring to the…

view full answer...

Answer 3

If your Lexus RX350 already has the tow package which provides the taillight converter that's plugged into the connector located behind the passenger side cargo area bulkhead as shown in the linked instructions, you'll just need the…

view full answer...

Answer 4

For the most reliable and safe connection possible, Curt recommends obtaining the power for the controller directly from the vehicle battery and running the circuit through a 30 amp breaker like what's provided with the #ETBC7. This way, you can…

view full answer...

Answer 5

To get both of the 2021 Subaru Outbacks pulling the Safari Condo F1743, you would need to purchase two of the #ETBC7 kits. They would piggy back off of the existing 4 pin connections already on the vehicles, so you are already partially there. I did…

view full answer...

Answer 6

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

view full answer...

Answer 7

You are able to use the #3040-P to install the Tekonsha Primus IQ #90160 on your 2016 Lexus GX 460 without any issues. I can't say we've ever heard of anyone ever reporting this back to us and as you mentioned, the vehicle is already set up…

view full answer...

Answer 8

You are looking for the rear tail light fuse on your 2021 RX 350. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #C56217 connects in line with your rear tail lights to power your trailer harness. I have attached a…

view full answer...

Answer 9

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 requires your 2021 Lexus RX 350 to have the factory tow package which includes a factory installed module to power the trailer lights. Since your harness does not have power I…

view full answer...

Answer 10

We have two really great and easy to install trailer wiring harnesses that fit your 2019 Lexus RX 350. We have the Tekonsha kit part #118255 for if you do not have the factory tow package, or if you did have the tow package part #118252 which is just…

view full answer...

Answer 11

For your 2018 Lexus RX 350 the Tekonsha T-One Vehicle Wiring Harness #118252 will work perfectly. This custom harness will plug right into the OEM tow package port behind the rear bumper (see attached image) and provide you with a 4-Way connector to…

view full answer...

Answer 12

The best way to add a 7-way trailer connector onto the back of your 2017 Lexus RX 450h that already had a 4-way connector is with #ETBC7. This gives you all the components needed for a fully functioning 7-way and comes with the instructions, which…

view full answer...