Can The Mount-N-Lock SafetyStruts Standard RV Bumper Support Brackets Work On A 2-1/2 Bumper?

Question

Question:

I have a Grand Design 5th wheel with a 2 1/2 inch bumper. Will this work on mine or do you have to have a 4 inch bumper

asked by: Steve B

0

Expert Reply:

The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets # MO22FR is meant to fit on bumpers at least 4" wide, but with use of the included spacer, can fit bumpers 4-1/2" wide, meaning, it is not able to work with your 2-1/2" wide bumper.

expert reply by: Bryce D

0

Answer 1

Yes that's correct! As long as the load is evenly distributed the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets #MO22FR will accommodate up to 400lbs, and will fit bumpers that are 4" to 4-1/2". Additionally, bumper…

view full answer...

Answer 2

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 3

Since the carrier and cargo you are planning on using with this hitch is around 500 pounds, your best option is going to be with a frame mounted trailer hitch. I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver #C13702. This…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Can The Mount-N-Lock SafetyStruts Standard RV Bumper Support Brackets Work On A 2-1/2 Bumper?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching