Fastway e2 Spring Bars For Trailer With Close to 700 lb Tongue Weight  

Both the Fastway e2 and Blue Ox TrackPro are going to provide your 7,000 lb GVWR 2021 Micro Minnie 2108DS with excellent leveling and sway control at the spring bars, but there are a couple of distinctions between the two. First, let's just…

As long as your trailer does not exceed 800 pounds, I recommend the 800-pound bars over the 1,000 pound bars. This is because you are right on the money when you conclude that the 1,000 pound trunnions with your trailer will be a stiff ride. Since…

Yes, if the Fastway e2 Weight Distribution System you have now has trunnion spring bars like part #FA92-00-0800 then you can use the Replacement Trunnion Spring Bars part #FA92-01-0699.

You can upgrade your Fastway E2 #FA92-00-0600 with Trunnion bars with up to a 600 lb total tongue weight capacity to a larger capacity rating by changing out your trunnion bars. Remember that weight distribution systems will be based on total tongue…

You will definitely want to go with the 1,000 lb. bars #FA92-01-1099 rather than the 800 lb. bars #FA92-01-0899. It is better to go with a system that can support you while you are at your heaviest, and deal with what could be a slightly more stiff…

In regards to a weight distribution system like the Fastway e2, it's better to be well under than over the weight capacity. If you're over then you'll lose any sort of warranty associated with the product and the system won't preform…

I do have an option for you but you will need part #FA92-01-0899 instead of part #FA92-02-0899 to fit the weight distribution head. The Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems part #FA92-01-0899 will work fine with…

To convert your Fastway E2 part #FA92-00-0600 to a 1,000 lb tongue weight kit you just need to swap your current spring bars out for the replacement Trunnion bars part #FA92-01-1099 and you'd be set.

If your trailer has a maximum loaded tongue weight that is topping out at around 600 pounds, then your Fastway e2 Weight Distribution System #FA92-00-1000 is indeed a bit over-rated with its 1,000 pound tongue weight capacity. An over-rated weight…

I recommend going with the 600 pound bar #FA92-01-0699 for this application, since you mentioned the tongue weight is only 390 pounds. These bars will give you plenty of capacity without running the risk of being overloaded. You could also use the…

The majority of sewer hoses won't fit inside a standard 4" RV rear bumper because the molded-on ends which contains the lug and bayonet fittings are too large. However, if you were to go with an option that doesn't have the molded-on…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…