Can the 600 Lb Spring Bars Be Used on the Fastway e2 800 Lb System  

There is; overrated spring bars for a weight distribution hitch like your Fastway e2 will not only give you a much stiffer ride, the trailer will be prone to bouncing so it will be less controllable and comfortable as you tow. So for a trailer with a…

You will definitely want to go with the 1,000 lb. bars #FA92-01-1099 rather than the 800 lb. bars #FA92-01-0899. It is better to go with a system that can support you while you are at your heaviest, and deal with what could be a slightly more stiff…

You can upgrade your Fastway E2 #FA92-00-0600 with Trunnion bars with up to a 600 lb total tongue weight capacity to a larger capacity rating by changing out your trunnion bars. Remember that weight distribution systems will be based on total tongue…

In regards to a weight distribution system like the Fastway e2, it's better to be well under than over the weight capacity. If you're over then you'll lose any sort of warranty associated with the product and the system won't preform…

To convert your Fastway E2 part #FA92-00-0600 to a 1,000 lb tongue weight kit you just need to swap your current spring bars out for the replacement Trunnion bars part #FA92-01-1099 and you'd be set.

I do have an option for you but you will need part #FA92-01-0899 instead of part #FA92-02-0899 to fit the weight distribution head. The Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems part #FA92-01-0899 will work fine with…

Weight distribution system bars like the Blue Ox Sway Pro #BXW4006 all work well over a range of loaded trailer tongue weight (TW). These particular bars are suited for a trailer with a loaded TW of 550 to 750-lbs. All Blue Ox bars are shown on the…

To move to a different spring bar weight capacity/range you have to just replace the bars if it's a round bar setup or the bars and the head of the system if it's a trunnion setup. So if you have a round bar setup now you'd want two of…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…