Matching Back Cover to Use with Solera Awning Head Cover # LC643922

Question

Question:

What would be the back part number for the part number LC643922. I need front and back Thanks

asked by: Bryan B

0

Expert Reply:

The back cover that matches the # LC643922 that you referenced is the part # LC643921.

expert reply by: Jameson C

0

Answer 1

Surely! To replace the drive head cover for your Regal Awning you need part #LC643922 for the front part of the cover and part #LC643921 for the back part of the cover. Attached are review videos for you to check out.

view full answer...

Answer 2

The Solera awnings do not use a spring that applies tension on it so that won't be a concern. What you will want to do when installing the Solera Power Awning Replacement Motor #LC266149 is to bring the awning out about 12 inches or so and then…

view full answer...

Answer 3

There is usually an in-line fuse with wiring that leads up to the battery. The best thing to do first is to disconnect the system from your battery for about 10 minutes and then reconnect. This will serve the same function as a reset button. If this…

view full answer...

Answer 4

For your 2021 Jayco 27RL I recommend the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen Item #FCE48TASL-05. This system has the three cameras and 5" monitor screen you're wanting and is…

view full answer...

Answer 5

You can use either of two Furrion camera systems on your 2018 Jayco Eagle HT 29.5 BHOK, the #FOS43TASF with the 4.3-inch screen or the #FOS05TASF which uses the same camera, but which has a larger 5-inch monitor and multi-camera capability. Both are…

view full answer...

Answer 6

The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras #FR98NR is very popular mainly because it gives you side lights that also act as marker lights so they are a little hidden and the whole system just looks pretty…

view full answer...

Answer 7

Lippert makes a lot of products that are for OEM applications that aren't marked the same as their aftermarket products. So the front and back covers you need are the part #LC289561 and #LC289560.

view full answer...

Answer 8

I attached a picture of what the wax screws look like for the Solera awnings like of the #LC289561 instructions that you referenced. Basically it's under the black cap that you'll pop off and you'll unscrew that you see in the second…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...