What Hitch Will Fit My 2022 Honda CR-V Hybrid

Question

Question:

I saw where you said that you did have a tow hitch for the 2022 Honda CRV HYBRID, not the regular CRV. if so what parts are needed Ill order immediately

asked by: Stephen K

0

Expert Reply:

When it comes to installing a trailer hitch on your 2022 Honda CR-V The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98848 will actually work on both Hybrid and Non Hybrid models. It has a gross towing weight up to 3,500 pounds and has a tongue weight up to 525 pounds. I recommended checking your vehicle's manual to know the proper towing rating for your vehicle. This hitch has a concealed cross tube and has a matte black powder coat finish over a protective base coat which offers superior rust resistance.

If you plan on towing any trailer you will also need The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118741. This is a simple plug and play system that comes out as a 4 flat connector, and to finish your towing experience you will need The Curt Towing Starter Kit # C45534. This includes a ball mount, a 2 inch hitch ball, and other starter towing accessories.

I have attached a installation video link below.

expert reply by: Noah E

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...