Which Thule Fit Kit Fits Podium Feet to Tracks on Leer Camper Shell

Question

Question:

Hi we already own a set of thule 480 podiums and were wondering what foot pack fit kit we need to fit our thule rails installed on our leer topper. Thanks

asked by: Garrett

0

Expert Reply:

The Thule fit kit that fits the tracks you have on the roof of your Leer camper is the part # THKIT3132.

expert reply by: Jameson C

0

Answer 1

The roof rack we have for the Leer cap on your 2020 Toyota Tacoma is the Thule TracRac CapRac Ladder Rack #TH29200XT. This is easy to install and has a higher weight capacity that basically matches any roof capacity of the camper shell its…

view full answer...

Answer 2

The correct fit kit to use with the Thule Feet part #TH460R and your current Evo Square bars like part #TH712500 is actually the part #THKIT3101 for your Leer camper shell roof rack tracks.

view full answer...

Answer 3

The Replacement FootBase for Thule Tracker #753-2149 is what you currently have on the Thule tracks on your Leer shell. This footbase is for the now discontinued Thule Tracker square bar setup. You may be able to piece this system together even…

view full answer...

Answer 4

If the A.R.E. cap on your Ram 2500 features the factory tracks, we do indeed have a roof rack system available that will attach directly to them without the need to drill any holes into the cap. You will need 4 of the Yakima Control Towers…

view full answer...

Answer 5

For a Yakima rack that fits the A.R.E. CX Evolve camper shell on your 2017 Toyota Tacoma I recommend the following: -4 Yakima Control Towers #Y8890027 -2 sets of the Yakima Landing Pad 1 #Y00221 You also need 1 set of Yakima Crossbars. You will…

view full answer...

Answer 6

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 7

There were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: 4 of the Yakima…

view full answer...

Answer 8

The truck caps use the rails that the Thule Podium Feet #TH460R are compatible with when you use the Thule Fit Kit for Podium Style Foot Pack #THKIT3101. You would then need the appropriate length crossbar. For an Aero WingBar 53 inch #TH711420 or…

view full answer...

Answer 9

The Thule fit kit part #THKIT3101 fits the Leer camper shell roof tracks which would allow you to use the Thule feet part #TH460R. Then you can use bars like the 60 inch #TH711520 for an aero bar or #TH712500 for square.

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

You are correct, you need the Thule Fit Kit #THKIT3101 to connect the Thule Roof Mounted Top Rack System #THTB60 that is on your Leer Work Cap, to the Rapid Podium Feet #TH460R. And then finally your Thule SquareBar Evo Crossbars #TH712500. I…

view full answer...

Answer 12

Yes, to install a Thule roof rack system using the Yakima tracks already on your A.R.E. topper you will just need the Thule Fit Kit #THKIT3101, the Podium Feet #TH460R, and a set of crossbars like the 60" WingBar Evo #TH711520. This will…

view full answer...

Which Thule Fit Kit Fits Podium Feet to Tracks on Leer Camper Shell

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching