Replacement Side Rail End Caps For A TruXedo Lo Pro Tonneau Cover On A 2014 Ford F-150

Question

Question:

Part look different that what is on my cover. Part number on cover is 1703866 Rev. E 2014 F150 IS THE VEHICLE. need side rail end plugs. Side rail cap 1115373. That is the part number in owners manual. Serial number on cover is 1703866

asked by: Mark M

0

Expert Reply:

For your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX567101 (NLA) on your 2014 Ford F-150, the correct end caps are the Replacement Front Header End Plugs for TruXedo LoPro Tonneau Covers # TX1117540 that you mention.

expert reply by: Bryce D

0

Answer 1

The TruXedo Side Rails 1113645 were used on a few different tonneau covers with the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover being the most popular. Therefore, the Replacement Side Rail End Caps With Seals for Truxedo LoPro Tonneau Covers part…

view full answer...

Answer 2

For the Replacement TruXedo Tapered Weather Seal for Lo Pro QT Tonneau Covers #TX1114731 sold by the foot the thicker side goes up.

view full answer...

Answer 3

You still would want to attach the seal strip of the Truxedo Pro X15 part #TX22GR to the bulk head even though it has a spray on bedliner

view full answer...

Answer 4

I went ahead and checked out your tonneau, and it looks like you have a LoPro so you could just use the Replacement Side Rail Endcaps for TruXedo LoPro Tonneau Covers #TX28TV as these will fit all LoPro tonneau covers.

view full answer...

Answer 5

The best method to identify the tonneau cover on your 2008 GMC Sierra will be to look for the date code and or serial number. The serial number is located on the driver's side of the front header on the TruXport frame. The date code is printed on…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...