What Synthetic Wheel Grease do You Recommend for My Travel Trailer Wheels?

Question

Question:

2020 Jayco 264 bh traveltrailer. what is the best grease to use for the wheels. I would prefer a full synthectic . But will consider anything that you believe to be the best. also if you carry this and I will need a grease gun My axles have a zerk fitting for lube. Thank you for your time.

asked by: Elmer F

0

Expert Reply:

For your 2020 Jayco travel trailer's wheels with zerk fittings, I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications # L11465 along with the grease gun # L30200. This grease is fully synthetic and is perfect for wheel components.

expert reply by: Bob C

0

Answer 1

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense…

view full answer...

Answer 2

I am pretty sure that the axle you are in need of is a 7k axle that has 95 inches from hub face to hub face and 80 inches from spring seat center to spring seat center which we do have a replacement for with the part #8327834. I would recommend you…

view full answer...

Answer 3

7k Dexter axles are a little annoying as they can have two different seals with only difference being the inner diameter. If the seal has an inner diameter of 2.250 inch you'd want the part #GS-2250DL or if instead you had the spindle diameter as…

view full answer...

Answer 4

Since you have 8K 3" axles you'll just need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles #RM-2460-2580. The 3-1/2" requirement you were getting with the #RM-2470-2580 was simply…

view full answer...

Answer 5

There are many options out there. LubriMatic Disc/Drum Brake and Wheel Bearing Grease #L11465 is a great one. You can use it on disc or drum brakes. It can also be used to grease wheel bearings.

view full answer...

Answer 6

You are always going to end up burning a seal when you work on a hub or change bearings. Anything that requires removing the seal. Its because they go in so tight. With an EZ lube axle you are going to want a double lip seal so your instincts were…

view full answer...

Answer 7

My research on your boat trailer tells me that you likely need the following: -Replacement OUTER Trailer Hub Bearing - #L44649 (I.D. of 1.063") -Replacement INNER Trailer Hub Bearing - #L68149 (I.D. of 1.378") -Timken Grease Seal - Single…

view full answer...

Answer 8

We have the Dexter Axle Double Lip Seal for Marine Hubs #168255TB which has the 1.68 inch diameter you need along with the 2.56 inch inside hub diameter you need.

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like #L11390 have 14…

view full answer...

Answer 11

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

view full answer...

Answer 12

The correct replacement grease seal for seal number 470361 is part #RG06-050 for a pair or part #58846 for a single seal. Part #168255TB has a smaller inner diameter than your current seal.

view full answer...