Can I Use DeeZee Custom-Fit Truck Bed Mat In 2018 Nissan Frontier W/ Factory Spray-In Liner

Question

Question:

I HAVE A NISSAN FRONTIER 2018 WITH A FACTORY SPRAY-IN LINER. IS THIS MAT OK TO USE IN IT?

asked by: KEN S

1

Helpful Expert Reply:

Yes, the DeeZee Custom-Fit Truck Bed Mat, part # DZ86965, will work for your 2018 Nissan Frontier with a factory-spray in liner. This bed mat fits both a 5' and 6' truck bed.

I have included a product review link below.

expert reply by: Mark Smith

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Answer 8

Yes, to use the Bauer Products Manger Door Lock for Horse Trailers #BA95FR in a right hand configuration you'd just have to flip the latch so that the locking mechanism is on the right hand side.

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The height of the SumoSprings Solo Custom Helper Springs #SSR-612-47 is 4-1/2". These are designed to have a 1/2" - 1" gap so if you have a lift you will need to measure to make sure they will fit. If the gap is more than 1" then…

view full answer...

Answer 12

This is a very common issue with newer Nissan vehicles like your 2019 Nissan Frontier. There is a missing relay needed to activate the trailer running light circuit. The running light relay can be installed or replaced with #C57000. One likely place…

view full answer...