Can You Use Mito Corporation Cameras with the Rear View Safety 9" Color Monitor

Question

Question:

I need to know if your Rear View Safety Color Monitor - 9inch LCD Digital Screen - Quad View Item # RVS-6139Q is compatible with Mito Corporation Backup and side view cameras. These cameras have six pin male connectors at my monitor.

asked by: Doug W

0

Expert Reply:

I contacted the manufacturer in regards to your question, they informed me that the Rear View Safety Color Monitor # RVS-6139Q uses cameras with 5 pin connectors, so your Mito cameras with 6-pins would not work unless you wanted to use the Rear View Safety Splice Kit # RVS-SPK01 to splice your cameras in.

They did strongly recommend that their cameras, like the Rear View Safety Backup Camera # RVS-771, Rear View Safety Side Camera - Driver's Side # RVS-775L and Rear View Safety Side Camera - Passenger's Side # RVS-775R be used.

expert reply by: Scott S

0

Answer 1

The best hitch for your 2017 Subaru Outback wagon will be the Draw Tite hitch part #75673 which is a Class III hitch with a 2 inch opening. This hitch size gives you the most flexibility with hitch accessories and the best capacities as well. I…

view full answer...

Answer 2

It sounds like you're trying to add some lights to a flat bed trailer being towed by a 2017 Ford F-350. If your 2017 Ford F-350 has a 4 way round pin plug installed (or you're willing to do some wiring), you can use the Heavy Duty…

view full answer...

Answer 3

To replace the female 5-pin connector for your RVS backup camera system we have the Rear View Safety Splice Kit #RVS-SPK01. This comes with 2 of the female connectors that have bare wires on the other end so you can cut off your current connector and…

view full answer...

Answer 4

I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because these…

view full answer...

Answer 5

I reviewed Winnebago documentation for 2004 model year motorhomes and some came with the option of a Jensen in-dash radio/rearview monitor system while others did have a Sony option. The best way to know what was installed on your specific RV is to…

view full answer...

Answer 6

The Rear View Safety Splice Kit #RVS-SPK01 contains 2 female connectors. If you are needing one male and one female connector I recommend using the Rear View Safety Camera Extension Cable #RVS-101N and cutting it so that you have one female and one…

view full answer...

Answer 7

Probably the best option we offer would be the Trailer Valet XL part #TVXL2 which is designed for exactly what you are looking to do but it doesn't do great on grass if the ground is uneven at all or wet. Without seeing your exact setup I…

view full answer...

Answer 8

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Can You Use Mito Corporation Cameras with the Rear View Safety 9" Color Monitor

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching