Does Curt Fifth Wheel Rail Kit Adapter C88KR Fit 2021 Chevy Silverado 2500 Short Bed

Question

Question:

I just want to confirm that the adapter rail for the Curt hitch, C88KR will fit the 6 3/4 bed puck system.

asked by: David A

0

Expert Reply:

Yes, the Curt fifth wheel rail kit adapter part # C88KR that you referenced does fit the OEM rail kit of your 2021 Chevy Silverado 2500 short bed.

expert reply by: Jameson C

0

Answer 1

The E/CN error on your remote indicates that communication was not established for 2 seconds. The first thing you should try is using the remote outside near the compressor. If you do not have the error then there is interference inside the vehicle…

view full answer...

Answer 2

The ECN error code of a Firestone wireless compressor setup means that the remote has lost communication with the compressor. This very well can be because the compressor is not powered on so the remote has nothing to connect to. I would try…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 9

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 10

Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you can…

view full answer...

Answer 11

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Does Curt Fifth Wheel Rail Kit Adapter C88KR Fit 2021 Chevy Silverado 2500 Short Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching