Sway Bars, Steering Stabilizer and Suspension Helpers For a 2021 Winnebago Adventurer 27N and 29B

Question

Question:

I have winnebago 2021 adventurer 29n and I want front back sway bars and steering stabilizer. Which product would you recommend that fit our camper

asked by: Michael W

0

Expert Reply:

I was able to confirm that both the 2021 Winnebago Adventurer 27N and 29B were both built on a 2020 Ford F-53 18,000LB GVWR chassis. The Roadmaster Front Anti-Sway Bar # RM-1139-148 replaces the stock sway bar on your Winnebago. The Roadmaster Rear Anti-Sway Bar # RM25VR adds an additional sway bar to your chassis to help reduce body roll.

The Roadmaster Reflex Steering Stabilizer with Mounting Brackets # RM62VR does a little more than a standard steering stabilizer. It has a coil spring that gives the steering a memory so that it always wants to return to straight.

Another very popular item you can add is the SumoSprings. These will add additional stability and improve ride height on the Front # SSF-170-40-2 and Rear # SSR-184-40-1 suspension. Both SumoSprings feature a bolt on installation with lifetime warranty. These are Made in the USA just like the Roadmaster products listed above.

expert reply by: Bud M

0

Answer 1

I checked with Roadmaster and verified the correct front anti-sway bar for your Class A 2017 Ford F-53 chassis with a 18,000 lb GVWR; it is the following part number: - Roadmaster Front Anti-Sway Bar #RM-1139-148

view full answer...

Answer 2

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 3

For reduction in sway and improvement in ride quality the best modification you can make is a rear sway bar like the part #RM-1139-146. Next in line is a front sway bar like part #RM-1139-148 followed by a steering stabilizer like part #RM-RBK4-RSSA.…

view full answer...

Answer 4

Yes, the Roadmaster Rear Anti-Sway Bar part #RM25VR which is a fit for a 2021 Jayco Alente 31V on Ford F-53 Chassis is designed to work with the factory sway bar so there will be no compatibility issues. They are designed to be used together.

view full answer...

Answer 5

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 6

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 11

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 12

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...