Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Economical and easy to use with your DrawTite hitch receiver. This basic hitch cover keeps dirt and debris out of your receiver and does not need a pin to hold it in place.
Trailer Hitch Receiver Cover for 1-1/4" Trailer Hitches
Hitch cover does not require a pin or clip to hold in place.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, haulers. Today we're going to be taking a look at Draw-Tite's Rubber Hitch Cover. They're available for either two inch hitches or for one and a quarter inch hitches. This Draw-Tite Hitch Cover is a press to fit. So there's no pin or anything needed to hold it in place. It just pushes in and it stays in there.
And when you're ready to take it out, just give it a nice tug and it'll pull right out of there. You can see the raised sections around the outside, where it presses it tight, holding it in.The main purpose of our Draw-Tite Cover here is to keep dirt and debris from getting inside of our hitch receiver when we're not using it. As dirt and debris builds up inside the hitch receiver, it can be difficult to slide in and out your accessories, and it could get bad enough to a point where you can't get the accessory in until you clean all that dirt and debris out.Keeping a cover in there is going to prevent you from having to do this because it's not going to be able to build up on the inside edges, just here around the outside, and we can just hit that with a hose, no big deal. And plus it's on the outside, so it's not going to affect the operation of sliding anything into the receiver.It's also going to give you a nice appearance on the back of your hitch, displaying the Draw-Tite logo and completely hiding the opening on your receiver. And once you get your hitch installed, you can enjoy its appearance and be sure that you'll be able to enjoy its functionality with ease of use for a long time to come.Now we do have various other hitch covers here at etrailer.com with different logos on them.
So you can pick one that's going to best suit your needs, but Draw-Tite also has a another product available, which is only for the two inch hitches, but it is a hitch silencer and hitch cover in one. I would recommend that one, if you do have a two inch hitch and you've got the clearance to use it because it acts as an anti-rattle device, in addition to being a hitch cover.The only reason why that you wouldn't want to use that one over this one is if you don't have proper clearances around your receiver, as this one slides right inside your receiver end to hold it in place. The silencer will go around your hitch receiver, so you need a little bit of extra space around the outside. And what's cool about that one is it has a door that flips open that covers up your receiver, but it also has a locking lever on the side. So once you put whatever you have now, you hit the locking lever down and it shifts the whole assembly over a little bit, pressing it tight against the receiver, eliminating any rattle noises.
And that completes our look at Draw-Tite's Rubber Hitch Cover.
Average Customer Rating: 4.9 out of 5 stars (298 Customer Reviews)
Economical and easy to use with your DrawTite hitch receiver. This basic hitch cover keeps dirt and debris out of your receiver and does not need a pin to hold it in place.I have placed several orders with trailer over the past 10 years and they have always had the exact parts for me and their service and pricing have been top notch.
This is our second hitch from etrailer! The whole experience has been great from ordering, fast shipping, great price and the product is high quality. Also giving detailed installation instructions is awesome.
Hard to find a 1.25" receiver "plug" - I chose this because it's flexible RUBBER - not hard plastic - and the inner core of this is longer than others available - once you stick it in the receiver hole - it stays.
I happened to buy a Draw tite hitch - and like the symmetry of the logos as a bonus - but will work nicely in any 1.25" receiver.
As always - promptly sent out by etrailer with great communication.
I have a 1 1/4 hitch from "Hidden Hitch" and had a rubber hitch cover that was either stolen or got pulled out somehow; at any rate it was lost. This one is an excellent replacement; actually this one is more secure than the one I got with my 1 1/4 hitch. When you put this hitch protector into the open hitch it goes in further and is VERY securely in place. I bought a couple to be safe; but I highly recommend these!
Here is my setup using the items from my two orders, including the two ant-rattle devices (not mentioned in captions). The pictures aren't that great of quality, since I just used my cell phone (my only camera anymore). Everything works perfectly.
Convenient little sucker. Highly recommend to plug the receiver to keep dirt and water out.
How do you write a review about a little rubber plug? Well, here is how I did it....
I tried the etrailer plug, the Curt plug and the Drawtite. All three were similar priced. Of the three, this cover definitely holds the best. This is a big deal when you travel rough country roads. The cover keeps out dust and gravel and it gives the vehicle a cleaner appearance. Nobody wants to see your rusty, old hitch with the wires dangling down! Best rubber hitch plug out there because of it's larger rubber ribs. It stays on.
Jeff L.
10/15/2017
Wow, I still have it! It still stays put.
Fits well looks clean
Tomas
11/5/2020
Works great With the receiver out you cannot tell it’s even there. car tows well Prius power!
Draw-Tite Rubber Tube Cover for 1 1//4" receiver hitch. Order was filled and shipped quickly. Arrived as expected and fit perfectly! Am pleased with the service and product. Would definitely recommend etrailer and this product to others.
Lawrence M.
8/5/2017
Still working fine! A great Tube Cover!
I first wanted a fancier cover but, when Rose G. looked into it and informed me that it did not come in the size I needed so,decided on this one. It's perfectly functional, fits well, and actually blends into the cart so it doesn't draw attention to the hitch. Great product, and I'm happy with it.
Tom D.
6/7/2016
Fits,Looks, and performs like it did over a year ago! Great product!
Etrailer is the place to get it right the first time. Needed 1 &1/4 inch receiver cover, looked all over it was right here on etrailer.com
Michael C.
4/13/2018
I use it every day
Arrived quickly and as described. Much appreciated. Subaru dealer installed my hitch but was unable to sell a replacement 1.25" plug. Hard to fathom.
Van
11/12/2015
I bought several. Good thing since one was extracted going through an auto car was. Those brushes must have hit it just right.
Rachael H.
11/12/2015
This install was much easier then I expected. The etrailer online step by step video gave me the confidence to install the hitch and wiring without any problems. I installed it last weekend and took my boat the the lake the following weekend. Quality of the products was great! I did go to the BMW dealership and bought the color matched plastic rivets for the wheel well trim. I suggest you get six. My wheel well trim piece is white. etrailer provides black rivets.
Just placed a 1 1/4 “ trailer hitch cover It seems to fit really snugly so very happy about that! I drive a 2020 Acura RDX and our hitch is mainly for our bike rack as we’re into cycling. I like having the tube protected from road debris, splash etc that can cause dirt and rust making inserting our bike rack difficult. We lost our original rubber covers twice already either from a car wash or theft. This new one seems to really fit in well and seems secure. We’ll see! Wish there was another option but a similar cover with a fail safe rubber loop
was not available to n the 1 1/4 only available in the 2” hitch .
Looks good, works fine, keeps the snow and rain out of the hitch tube. Makes the hitch look complete. No obvious wear or tear after one year of on vehicle use.
Brian R.
3/6/2018
Excellent. still looks and functions great!
This rubber Tube Cover was purchased so that I would not have to experience driving with my hitch to the mall, and coming back to find it gone. Now I simply take off my hitch drawbar, replace it with my cover and go about my shopping in peace. Of course I purchased two of these in case anyone gets itchy fingers and decides to add it to their collection of stolen trophies. Yes, I could've purchased a lock for my hitch, but I am "old school" frugal. It is what it is! Great job "etrailer".
RE: Draw tite trailer hitch cover. Trailer hitch receiver cover was just as advertised. High quality and strong rubber insert fits snugly and looks very impressive. Communication and shipping by the company was great! I'll definitely do business with them again.
So appreciate the wonderful service from etrailer and the quality of the products they offer.
I bought Item 2211 Draw-Tite Hitch Cover and have been very pleased!
This cover fit our Draw-Tite 1-1/4" hitch perfectly. Fits very snug and looks good. Price is good too.
Deb
8/19/2017
Cover still fits snug and looks as good as new.
This is the best of the three rubber pieces for 1 1/4 that I was considering. I went to the will call etrailer warehouse and looked at all three and put them on one of their 1 1/4 hitches. It stays on the hitch much better than the Curt or Hidden Hitch.
This is a great looking generic hitch cover. It fits tightly into receiver hitch so it will not easily slip out, like when going through a touchless car wash. Great price and fast shipping. Thanks etailer.
I have purchased four of these during the four years I have had this hitch. Your information on this product says it can go through a car wash without being dislodged. The last two rubber tube plugs were lost in my car dealers car wash. When I have used the local Jet Splash I have not had a problem. I will now remember to remove the plug when my car is at the dealer’s and a car wash is scheduled. I am thankful it was an inexpensive idea to replace.
etrailer.com ordering is exceptional , no hassles at all , imputing your info and placing an order is very friendly and easy. Tracking info and order status is current and easy. The product arrived and they packaged it with extra care. Good experience dealing with etrailer and I look forward to future shopping with etrailer.
Do you have a question about this Hitch Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rich C.
4/11/2020
Absolutely perfect! No complaints at all.