Availability of Ag Spindle with A=1.75 B=1.5 c= no c D=1.25 E=.75 F=3.75

Question

Question:

I need an ag spindle with the following dimensions following your size chart. A=1.75 B=1.5 c= no c D=1.25 E=.75 F=3.75

asked by: Jeff

0

Expert Reply:

The closest agricultural spindle we have to what you are looking for is the part # TRU34FR which has A 1.75, B. 1.75, C. 1.5, D. 1.25, and E. .75. F. is 7.50.

expert reply by: Jameson C

0

Answer 1

The spindle dimensions are as follows: A is the mounting dimension, B is the seal dimension, C is the inner bearing surface, D is the outer bearing surface and E is the diameter of the threaded portion of the spindle for spindle nut selection. Say…

view full answer...

Answer 2

To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel…

view full answer...

Answer 3

I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…

view full answer...

Answer 4

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5…

view full answer...

Answer 5

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 9

The WeatherTech Side Window Air Deflectors, #WT82476, include deflectors for the front and rear driver's-side and passenger's-side windows of your 2014 Chrysler Town and Country. The deflectors for the front windows are actually longer than…

view full answer...

Answer 10

When installing the WeatherTech Side Window Air Deflectors #WT82476, there is no adhesive strips used on the front deflectors. I have attached a link to an installation video for the deflectors on a 2015 Grand Caravan and as you can see in the video,…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Availability of Ag Spindle with A=1.75 B=1.5 c= no c D=1.25 E=.75 F=3.75

Product Page this Question was Asked From

Continue Researching