Replacement Hitch Head for B and W Slider Base # BWRVB3370

Question

Question:

Good day, was wondering which fifth wheel head will fit on a RVB3370 sliding base.

asked by: Shane

0

Expert Reply:

The replacement head you'd need is the part # BWRVC3006 for the Companion sliding base part # BWRVB3370.

expert reply by: Jameson C

0

Answer 1

The Rhino #LC65VR is a stand alone item relative to the other available pin boxes, so not really a long or medium jaw since a Rhino pin box only replaces a Rhino pin box. This does not cross over to replace other makes. If you need a replacement…

view full answer...

Answer 2

The Trailair Flex Air 5th Wheel Pin Box - Lippert Rhino - 21,000lbs Item #LC65VR is exactly what you're looking for to replace your Lippert Rhino pin box.

view full answer...

Answer 3

The fix for towing a 5th wheel with a short bed truck is either a slider hitch or for beds that are shorter than 6-feet a replacement trailer pin box called a Sidewinder. Sidewinders move the trailer pivot point 22-inches back from the king pin, to…

view full answer...

Answer 4

The Reese Goose Boxes like the 20K Air Ride #RP85FR referenced in your question are pin box specific. This means they are designed to replace specific pin box models on the trailer so you will want to first make sure that it will be compatible.…

view full answer...

Answer 5

We carry the Trailair Flex Air 5th Wheel Pin Box, it is etrailer item #LC65VR. Please follow the hyperlink to product page and simply select the item to place in your cart, proceed to checkout.

view full answer...

Answer 6

We have cushioned pin boxes you can use to replace your Lippert Rhino pin box like with the Flex Air part #LC65VR but at this time we do not have any pivoting pin boxes that are a fit. The Flex Air pin boxes are the best cushioned option out there…

view full answer...

Answer 7

The correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter for a Lippert 1621 pin box is part #RP85FR which is rated for up to 20,000 lbs. With that being said, it is not recommend to use the Reese Goose Box on a short bed truck due…

view full answer...

Answer 8

The fitment of pin boxes like the Curt Flex Air 5th Wheel Pin Box #LC65VR are solely based on the bolt pattern for the trailer and not the tow vehicle. This specific pin box is a replacement for Lippert's Rhino Box bolt pattern. To determine what…

view full answer...

Answer 9

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Hitch Head for B and W Slider Base # BWRVB3370

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching