Ordering the Trailair Flex Air 5th Wheel Pin Box

Question

Question:

How before I can purchase a Pin Bos 807710

asked by: Robert L

0

Expert Reply:

We carry the Trailair Flex Air 5th Wheel Pin Box, it is etrailer item # LC65VR. Please follow the hyperlink to product page and simply select the item to place in your cart, proceed to checkout.

expert reply by: Michael R

0

Answer 1

We have cushioned pin boxes you can use to replace your Lippert Rhino pin box like with the Flex Air part #LC65VR but at this time we do not have any pivoting pin boxes that are a fit. The Flex Air pin boxes are the best cushioned option out there so…

view full answer...

Answer 2

The Rhino #LC65VR is a stand alone item relative to the other available pin boxes, so not really a long or medium jaw since a Rhino pin box only replaces a Rhino pin box. This does not cross over to replace other makes. If you need a replacement pin…

view full answer...

Answer 3

The Trailair Flex Air 5th Wheel Pin Box - Lippert Rhino - 21,000lbs Item #LC65VR is exactly what you're looking for to replace your Lippert Rhino pin box.

view full answer...

Answer 4

The fitment of pin boxes like the Curt Flex Air 5th Wheel Pin Box #LC65VR are solely based on the bolt pattern for the trailer and not the tow vehicle. This specific pin box is a replacement for Lippert's Rhino Box bolt pattern. To determine what…

view full answer...

Answer 5

The replacement head you'd need is the part #BWRVC3006 for the Companion sliding base part #BWRVB3370.

view full answer...

Answer 6

The correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter for a Lippert 1621 pin box is part #RP85FR which is rated for up to 20,000 lbs. With that being said, it is not recommend to use the Reese Goose Box on a short bed truck due…

view full answer...

Answer 7

The Reese Goose Boxes like the 20K Air Ride #RP85FR referenced in your question are pin box specific. This means they are designed to replace specific pin box models on the trailer so you will want to first make sure that it will be compatible. This…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Ordering the Trailair Flex Air 5th Wheel Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching