Will Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Rack Fit Yakima HD Load Bar

Question

Question:

Are these M8 size t-bolts? Will they fit the Yakima HD bars? Y8880184.

asked by: Allen

0

Expert Reply:

Yes, the Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks # 853-5715 that you referenced is an M8 T-bolt. It also would fit into the top channel of a Yakima HD load bar.

expert reply by: Jameson C

0

Answer 1

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 6

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

view full answer...

Answer 7

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top opening…

view full answer...

Answer 8

The correct load stops for a TracRac Ladder Rack will be based on which version you have. If you have the Thule branded ladder rack then you will need to use the Thule TracRac Ladder Rack Load Stop part #8537165 with the Washer part #951-0820-20 and…

view full answer...

Answer 9

Yes, the Replacement M8 T-Bolt #853-5715 will indeed fit the T-channel on your Thule Caprock Platform. This will definitely be your best option if you need a M8 x 20 T-bolt. It has a 3/4" wide head so it will fit nicely into the crossbars on…

view full answer...

Answer 10

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6 bolt…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Will Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Rack Fit Yakima HD Load Bar

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching