Difference Between Valterra Bladex Waste Valves T50 and T50A

Question

Question:

2020 Vanleigh Vilano 370 GB I,m looking to add a waste valve to the end of my dump outlet and would like to know the difference between the Valterra T50 and T50A and which one would I need. Thanks

asked by: Scott

1

Helpful Expert Reply:

So the difference is purely in how the two connect to your sewer pipe, which will also tell you which one you need; one will slide into the pipe (the spigot) while the other will slide onto the pipe (the hub):

- Slide Into Pipe: Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug # T50A

- Slide Onto Pipe: Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug # T50

To secure the valves to your pipe you would just need the Valterra ABS Solvent Cement # A05-0303.

expert reply by: Kyle S

1

Answer 1

The Valterra RV Waste Valve, part #T50A, consists of both the 3-inch valve spigot and the 3-inch bayonet outer cap. You can see this item in the linked review video.

view full answer...

Answer 2

Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this kit yet I've…

view full answer...

Answer 3

When RV sewer pipes are attached they use a solvent like the #A05-0303 that permanently attaches the two pieces. There isn't a way to separate them and only option is to cut off the old section and glue on a new part.

view full answer...

Answer 4

When gluing together Valterra RV sewer pipes like the #T1028 you'd need to use an ABS solvent cement like the part #A05-0303.

view full answer...

Answer 5

The lugs of a sewer pipe fitting can not be fixed so you would have to completely replace the fitting. To do that you'll have to first empty out the tank, which since your lug fitting has broken off will require you to hold the hose in place to…

view full answer...

Answer 6

I'd be happy to help. We have the Command Electronics #CE44VR which is the new version of the now discontinued 003-30LEM2. The new light is the same size, but instead of having a slight dome where the diodes are on the old light, the new light is…

view full answer...

Answer 7

Depending on the brand of the gate valve you will either be able to replace just the cable and handle or will have to replace the entire valve/cable/handle. LaSalle Bristol builds the cables into the housing for the valve, making them essentially…

view full answer...

Answer 8

Yes you are correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank part #E1003VP does come with everything you will need. The confusion came from the spigot or hub ends and which one they needed for their application in that question.…

view full answer...

Answer 9

I spoke with Valterra and they stated that there's a microswitch inside of the Valterra EZ Valve Electric Waste Valve #E40B-8 that isn't sensing that the gate is fully closing causing the fuse to blow. This could be either an obstruction…

view full answer...

Difference Between Valterra Bladex Waste Valves T50 and T50A

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching